Stock: In Stock
Model: TMC2130-SPI-Fysetc
The FYSETC TMC2130 V1.2 is a bipolar stepper motor driver prepared for SPI operation. In addition to STEP and DIR motion signals, firmware can configure current, microsteps and operating mode, read diagnostics and use StallGuard2 when the controller board also routes the required signals correctly.
..
5.50€
Ex Tax:4.55€
Stock: In Stock
Model: TMC2208-Fysetc
The FYSETC TMC2208 V1.2 is a StepStick driver for two-phase bipolar stepper motors, designed to substantially reduce motion noise and provide accurate control in 3D printers, small CNC machines, robots and automation projects. It can operate through standard STEP/DIR signals or use UART to configure..
4.35€
Ex Tax:3.60€
New
Stock: In Stock
Model: GATES-15GT-RF-10
Gates PowerGrip LL-1.5GT RF timing belt, 10 mm wide, with a 1.5 mm tooth pitch, sold by the metre. For building or renewing linear drives using this profile, particularly when smooth engagement and the surface finish of printed parts matter.
Gates specialises in power transmission and motion; Power..
9.95€
Ex Tax:8.22€
New
Stock: In Stock
Model: GATES-15GT-RF-6
Gates PowerGrip LL-1.5GT RF timing belt, 6 mm wide, with a 1.5 mm tooth pitch, sold by the metre. For building or renewing linear drives using this profile, particularly when smooth engagement and the surface finish of printed parts matter.
Gates specialises in power transmission and motion; PowerG..
6.95€
Ex Tax:5.74€
New
Stock: In Stock
Model: GATES-2GT-E-10
The Gates LL-2GT EPDM 10 mm belt is an open-ended timing belt with a 2 mm pitch, sold by the metre for 3D-printer linear drives and other motion systems. It combines the 2GT tooth profile with an EPDM rubber body, longitudinal glass-fibre reinforcement and a protective fabric tooth facing.Its main a..
10.95€
Ex Tax:9.05€
New
Stock: In Stock
Model: GATES-2GT-E-6
La correa Gates LL-2GT EPDM de 10 mm es una correa dentada abierta de paso 2 mm, vendida por metro para transmisiones lineales de impresoras 3D y otros sistemas de movimiento. Combina el perfil 2GT con un cuerpo de caucho EPDM, refuerzo longitudinal de fibra de vidrio y un tejido protector en la car..
7.95€
Ex Tax:6.57€
Stock: In Stock
Model: 1225B-BallBearing-24V
GDSTIME 12025 24V axial fan measuring 120 × 120 × 25 mm and equipped with dual ball bearings. It is designed to provide high airflow in electrical cabinets, electronics enclosures, enclosed 3D printers, CNC machines and other large-format ventilation systems.
This version has a nominal speed of 3..
5.99€
Ex Tax:4.95€
Stock: In Stock
Model: 12032Blower-BallBearing-24V
GDSTIME 12032 24V centrifugal blower fan with dual ball bearings, a 2-pin XH2.54 connector and a 30 cm cable. Its 120 × 120 × 32 mm format provides substantially more airflow than the compact blowers commonly used on print heads.
It is intended for ventilating enclosures, electronics, machines, f..
11.99€
Ex Tax:9.91€
Stock: In Stock
Model: Cable-XH2.54-1m
GDSTIME extension cable designed to add one metre to the connection of a two-wire fan. It has complementary male and female 2-pin XH2.54 connectors, providing a detachable connection without cutting or soldering the fan's original cable.
Main features
Brand: GDSTIME.
Nominal length: 1 m..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: 12032Blower-Sleeve-24V
Large-format GDSTIME centrifugal blower powered from 24 V and measuring a nominal 120 × 120 × 32 mm. Its airflow and pressure make it suitable for ducts, filtration, electronics cooling and larger-scale local ventilation than the blowers normally fitted around hotends.
Specifications
Brand: GD..
9.59€
Ex Tax:7.93€
Stock: In Stock
Model: 4020Blower-24V
GDSTIME 24 V centrifugal blower in a 4020 format, with a sleeve bearing and an approximately 20 cm cable. Its 20 mm thickness provides static pressure in a compact assembly suitable for nozzles, air ducts and localised cooling.
Specifications
Brand: GDSTIME.
Format: 4020.
Nominal dimensions:..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: 5015s-24v
GDSTIME 5015-format centrifugal blower powered from 24 V and fitted with a hydraulic bearing system. Its side outlet is designed for air ducts and nozzles, providing localised cooling in 3D printers, electronics and compact equipment.
Specifications
Brand: GDSTIME.
Format: 5015.
Nominal dime..
3.15€
Ex Tax:2.60€