Stock: In Stock
Model: 5020Blower-Sleeve-24V-25cm
GDSTIME 5020-format centrifugal blower powered from 24 V and using a sleeve bearing. Its 20 mm thickness provides more airflow than an equivalent 5015 model when the duct, bracket and available space are designed for this format.
Specifications
Brand: GDSTIME.
Format: 5020.
Nominal dimension..
7.65€
Ex Tax:6.32€
Only a few units in stock
-16 %
Stock: In Stock
Model: 2510-24V
The GDSTIME 2510 24 V is a compact 25 × 25 × 10 mm brushless axial fan for cooling hotends, small electronics enclosures, stepper drivers and other assemblies where installation space is limited. It has two wires, an approximately 15 cm cable and a white two-pin connector.
The photographed unit i..
3.20€ 2.70€
Ex Tax:2.23€
Stock: In Stock
Model: 3007-5V
GDSTIME 3007 5V axial fan with compact 30 × 30 × 7 mm dimensions, a sleeve bearing and a 15 cm cable. It is intended for cooling small electronic devices and mechanisms where there is insufficient space for a 10 mm thick fan.
Unlike a centrifugal blower, this fan moves air along its axis. It is s..
2.20€
Ex Tax:1.82€
Stock: In Stock
Model: 3010-BallBearing-Fan-12V-1m
GDSTIME 3010 12V axial fan with dual ball bearings and a 1 metre cable. Its 30 × 30 × 10 mm format provides direct cooling for hotends, small heatsinks and compact electronic equipment.
The dual ball bearing system is particularly suitable for extended operation, higher temperatures or mounting p..
5.40€
Ex Tax:4.46€
FLASH
-29 %
Stock: In Stock
Model: 3010-24v-1m
GDSTIME 3010 24V axial fan with a 1 metre power cable. Its compact 30 × 30 × 10 mm format is suitable for cooling hotends, small heatsinks, electronics and other components where space is limited.
The long cable simplifies installation in 3D printers and machines where the controller board is loc..
3.50€ 2.50€
Ex Tax:2.07€
Stock: In Stock
Model: 3010-BallBearing-Fan-24V-1m
GDSTIME 3010 24V axial fan with a ball bearing system and a 1 metre power cable. Its 30 × 30 × 10 mm dimensions make it suitable for cooling hotends, small heatsinks and electronics in equipment with limited space.
The ball bearing system is intended for frequent or extended operation, particular..
5.50€
Ex Tax:4.55€
Stock: In Stock
Model: 3010Blower-Ballbearing-24V
GDSTIME 3010 24V centrifugal blower fan with dual ball bearings and a 15 cm cable. Its compact 30 × 30 × 10 mm format provides directed airflow in installations where very little space is available.
The dual ball bearing system is particularly suitable for applications involving long operating pe..
6.75€
Ex Tax:5.58€
Stock: In Stock
Model: 4010Blower-BallBearing-12V-20cm
GDSTIME 4010 12V centrifugal blower fan with a ball bearing system and a 20 cm cable. It provides directed airflow through compact cooling ducts used in 3D printers, electronic equipment and small machines.
The ball bearing system is appropriate for frequent or extended operation, particularly wh..
6.65€
Ex Tax:5.50€
Stock: In Stock
Model: 4010-BallBearing-24V-1m
GDSTIME 4010 24V axial fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 10 mm format provides direct airflow for cooling hotends, heatsinks and electronic components.
The ball bearing system is particularly suitable for equipment subject to extended operation, higher workin..
5.25€
Ex Tax:4.34€
Out of Stock
Stock: Out of Stock
Model: 4010Blower-BallBearing-24V-1m
GDSTIME 4010 24V centrifugal blower fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 10 mm format produces concentrated airflow through compact cooling ducts.
The ball bearing system is suitable for equipment subject to frequent or extended operation. The long cable simplif..
6.25€
Ex Tax:5.17€
Stock: In Stock
Model: 4020s-12V
This GDSTIME 4020 centrifugal blower is designed for 12 V systems. Its impeller draws air through the circular inlet and directs it through a lateral outlet, making it suitable for 3D-printer part-cooling ducts, small electronic equipment and projects requiring concentrated airflow.
Unlike an axi..
3.60€
Ex Tax:2.98€
-32 %
Stock: In Stock
Model: 4020-12V
Designed for active cooling in 3D printers, electronic equipment and automation systems, this GDSTIME 40 × 40 × 20 mm axial fan operates from a 12 V DC supply and provides a balanced combination of airflow, low noise and long service life. It is suitable for cooling control boards, heatsinks, enclos..
4.75€ 3.25€
Ex Tax:2.69€