-20 %
Stock: In Stock
Model: Lámina Fysetc 220x220
The FYSETC 220 × 220mm flexible sheet combines two printing surfaces on a single spring-steel plate: a smooth gold face and a black textured PEI face. This lets you choose the bottom finish and adapt the surface to the filament without replacing the whole bed system.
It attaches to a compatible m..
32.00€ 25.75€
Ex Tax:21.28€
Stock: In Stock
Model: Mosfet-30A-Fysetc
External MOSFET power stage with a large heatsink for controlling heated beds, heaters and other resistive DC loads in 3D printers and similar machines.
The module allows the controller board to continue regulating temperature while the main heated-bed current is supplied directly by the power su..
13.25€
Ex Tax:10.95€
Stock: In Stock
Model: Espaciadores-MK52
FYSETC spacer and screw kit for mounting a nine-point MK52 heated bed on its Y carriage. The spacers establish a consistent rigid distance between both components, replacing the springs used by many four-point adjustable beds.
The arrangement follows the traditional system used by the Original Pr..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: Metal-Sherpa-V1.5
FYSETC Metal Sherpa Mini V1.5 CNC 6.25:1 Extruder with 36 mm Motor
The FYSETC Metal Sherpa Mini V1.5 is a compact dual-gear extruder with a CNC-machined aluminium housing and 6.25:1 reduction. It is designed for direct-drive or Bowden configurations that have a compatible mounting bracket, hotend..
89.99€
Ex Tax:74.37€
Stock: In Stock
Model: Mini-12864-LCD-Fysetc
The FYSETC Mini 12864 V2.1 is a compact 128 × 64 graphic display for controlling compatible 3D printers, CNC machines and electronic projects through a rotary encoder. It integrates a microSD reader, clickable encoder, reset button, beeper and addressable RGB backlight.
Its approximately 2.4-inch..
14.99€
Ex Tax:12.39€
Stock: In Stock
Model: KlickyProbe-Fysetc
The Fysetc PCB Klicky Probe is a kit for building a removable, magnetically attached Z probe based on the PCB Klicky design. This version combines the operating principle of the Klicky Probe project with circuit boards that align the magnets, provide electrical contacts and add an optional status LE..
17.50€
Ex Tax:14.46€
Stock: In Stock
Model: Portable-Input-Shaper
The FYSETC Portable Input Shaper is a portable resonance measuring device for 3D printers running Klipper. It combines an RP2040 microcontroller and a three-axis ADXL345 accelerometer on the same board, connecting to the Klipper host through USB-C as a dedicated secondary MCU.
It measures the pri..
14.99€
Ex Tax:12.39€
Only a few units in stock
Clearance
-21 %
Stock: In Stock
Model: R4-Fysetc
The FYSETC R4 is a compact 24 V controller board designed for four-motor Klipper 3D printers, with a particular focus on the Voron V0 family. It combines an RP2040 microcontroller, four UART-controlled TMC2209 drivers, bed and hotend outputs, three voltage-selectable fan outputs, three temperature i..
44.50€ 34.99€
Ex Tax:28.92€
Stock: In Stock
Model: TMC2209-Fysetc
The FYSETC S2209 V4.0 is a StepStick driver based on the TMC2209, designed to control two-phase bipolar stepper motors with quiet operation and advanced UART configuration. It can operate as a standalone STEP/DIR driver or provide firmware-controlled current, StealthChop2, SpreadCycle, CoolStep and ..
4.99€
Ex Tax:4.12€
Out of Stock
Stock: Out of Stock
Model: S6-fysetc
The FYSETC S6 V2.1 XH is a 32-bit controller board for 3D printers and custom machines requiring multiple motors, heaters, fans and peripherals. It is built around a 180 MHz STM32F446VET6 and provides six replaceable StepStick driver sockets.
This product is exclusively the XH connector version. It..
54.49€
Ex Tax:45.03€
Stock: In Stock
Model: Sherpa-V1.5
The FYSETC Sherpa Mini V1.5 is a compact 1.75mm filament extruder supplied with a NEMA 14 motor and dual-drive filament gears. Its small package is particularly useful for direct-drive toolheads where moving mass must be limited without giving up a geared transmission.
This revision combines an 8..
47.50€
Ex Tax:39.26€
Stock: In Stock
Model: Spider3-Fysetc-X-Voron
The FYSETC Spider V3.0 F446 is a 32-bit control board designed for 3D printers with many motors and peripherals. It combines a 180 MHz STM32F446, eight replaceable driver sockets, three hotend outputs, one bed output, six fan connectors and an onboard CAN transceiver in a compact 155.3 × 76.5 mm for..
69.99€
Ex Tax:57.84€