Stock: In Stock
Model: Mosfet-30A-Fysetc
External MOSFET power stage with a large heatsink for controlling heated beds, heaters and other resistive DC loads in 3D printers and similar machines.
The module allows the controller board to continue regulating temperature while the main heated-bed current is supplied directly by the power su..
13.25€
Ex Tax:10.95€
Out of Stock
Stock: Out of Stock
Model: 3DTouch-Fysetc
The Fysetc 3DTouch is a contact probe with a retractable pin, designed to measure the build surface so that the firmware can compensate for height variations during the first layer. Its operating principle is compatible with BLTouch-type probes, although this is a Fysetc product and not a genuine AN..
14.99€
Ex Tax:12.39€
Stock: In Stock
Model: Espaciadores-MK52
FYSETC spacer and screw kit for mounting a nine-point MK52 heated bed on its Y carriage. The spacers establish a consistent rigid distance between both components, replacing the springs used by many four-point adjustable beds.
The arrangement follows the traditional system used by the Original Pr..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: Metal-Sherpa-V1.5
FYSETC Metal Sherpa Mini V1.5 CNC 6.25:1 Extruder with 36 mm Motor
The FYSETC Metal Sherpa Mini V1.5 is a compact dual-gear extruder with a CNC-machined aluminium housing and 6.25:1 reduction. It is designed for direct-drive or Bowden configurations that have a compatible mounting bracket, hotend..
89.99€
Ex Tax:74.37€
Stock: In Stock
Model: Mini-12864-LCD-Fysetc
The FYSETC Mini 12864 V2.1 is a compact 128 × 64 graphic display for controlling compatible 3D printers, CNC machines and electronic projects through a rotary encoder. It integrates a microSD reader, clickable encoder, reset button, beeper and addressable RGB backlight.
Its approximately 2.4-inch..
14.99€
Ex Tax:12.39€
Only a few units in stock
-17 %
Stock: In Stock
Model: Lámina Fysetc MK52
The FYSETC flexible sheet for MK52 magnetic beds is made from spring steel and coated with powder-coated textured PEI on both sides. Its rough surface promotes first-layer adhesion and leaves an even textured finish on the bottom of the printed part.
After printing, the sheet can be removed from ..
34.99€ 28.95€
Ex Tax:23.93€
Stock: In Stock
Model: KlickyProbe-Fysetc
The Fysetc PCB Klicky Probe is a kit for building a removable, magnetically attached Z probe based on the PCB Klicky design. This version combines the operating principle of the Klicky Probe project with circuit boards that align the magnets, provide electrical contacts and add an optional status LE..
17.50€
Ex Tax:14.46€
Stock: In Stock
Model: Portable-Input-Shaper
The FYSETC Portable Input Shaper is a portable resonance measuring device for 3D printers running Klipper. It combines an RP2040 microcontroller and a three-axis ADXL345 accelerometer on the same board, connecting to the Klipper host through USB-C as a dedicated secondary MCU.
It measures the pri..
14.99€
Ex Tax:12.39€
Only a few units in stock
Clearance
-21 %
Stock: In Stock
Model: R4-Fysetc
The FYSETC R4 is a compact 24 V controller board designed for four-motor Klipper 3D printers, with a particular focus on the Voron V0 family. It combines an RP2040 microcontroller, four UART-controlled TMC2209 drivers, bed and hotend outputs, three voltage-selectable fan outputs, three temperature i..
44.50€ 34.99€
Ex Tax:28.92€
Stock: In Stock
Model: TMC2209-Fysetc
The FYSETC S2209 V4.0 is a StepStick driver based on the TMC2209, designed to control two-phase bipolar stepper motors with quiet operation and advanced UART configuration. It can operate as a standalone STEP/DIR driver or provide firmware-controlled current, StealthChop2, SpreadCycle, CoolStep and ..
4.99€
Ex Tax:4.12€
Stock: In Stock
Model: S6-fysetc
The FYSETC S6 V2.1 XH is a 32-bit controller board for 3D printers and custom machines requiring multiple motors, heaters, fans and peripherals. It is built around a 180 MHz STM32F446VET6 and provides six replaceable StepStick driver sockets.
This product is exclusively the XH connector version. It..
54.49€
Ex Tax:45.03€
Out of Stock
Stock: Out of Stock
Model: SBCAN-Fysetc
The FYSETC SB CAN ToolHead V1.3 brings the StealthBurner printhead electronics together on one board. It controls the extruder motor through an integrated TMC2209 driver, the heater and temperature sensor, two fans, RGB lighting, and inputs for a probe or endstop. An onboard ADXL345 supports Klipper..
34.50€
Ex Tax:28.51€