Stock: In Stock
Model: Calcetin-TZ-V6
This silicone sock for the TZ-V6 hotend wraps around the hot section to reduce heat loss, limit the direct effect of part-cooling airflow and help keep the block cleaner. It is a replacement part shaped specifically for the TZ-V6 assembly shown in the photographs.
What it adds to the ho..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Calcetin-vol
Insulating silicone sock for Volcano-type heater blocks. It wraps around the hot section to reduce heat loss, limit the direct effect of part-cooling airflow and help keep the heater block cleaner.
Main benefits
Thermal insulation: reduces heat loss from the block surface.
Imp..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Aislante Silicona Hotend
Silicone sock for the V6 heating block, its main advantages that keeps the nozzle clean and helps maintain temperature.Features:Manufactured from a non-stick silicone material, heat resistant, it will repel the accumulation of molten plastic. What helps with sticky materials and materials that tend ..
0.50€
Ex Tax:0.41€
Stock: In Stock
Model: conector esquina 3 conexiones - 2020
Internal three-way corner connector for joining 20 series aluminium profiles in a three-dimensional structure. Its three arms fit inside the profile slots, creating a compact and discreet perpendicular joint.
It is manufactured from zinc alloy and features M4 threaded fixing points. This connecto..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: conector esquina 3 conexiones - 3030
Internal three-way corner connector designed to join three 30 series aluminium profiles in a three-dimensional structure. It fits inside the profile slots, allowing three perpendicular profiles to be connected without using an external corner cube.
The connector is manufactured from zinc alloy an..
1.57€
Ex Tax:1.30€
Out of Stock
Stock: Out of Stock
Model: Conector-L 2020
Internal L-shaped metal connector designed to join two 20 series aluminium profiles at a 90° angle. Both arms fit inside the profile slots, leaving the outside surfaces of the structure unobstructed.
It provides a compact alternative to external brackets when a discreet joint is required and the ..
0.27€
Ex Tax:0.22€
Stock: In Stock
Model: Conector-L 3030
Internal L-shaped metal connector designed to join two 30 series aluminium profiles at a 90° angle. It fits inside the slots, keeping the external profile surfaces unobstructed.
It is suitable for compact corners in frames, enclosures and modular structures whenever the ends of the profile slots ..
0.55€
Ex Tax:0.45€
Stock: In Stock
Model: Conector-linea-2020-M5
Internal metal connector designed to join two 20 series aluminium profiles longitudinally. It fits inside the slot across the joint between both profile sections and is locked with four M5 set screws.
It helps keep the profiles aligned and allows a structure to be extended without placing a joini..
0.50€
Ex Tax:0.41€
Stock: In Stock
Model: Conector-linea-3030-M6
Internal metal connector designed to join two 30 series aluminium profiles longitudinally. It fits inside the slot across the joint between both sections and is locked with four M6 set screws.
It aligns and extends profiles without occupying their external surfaces with joining plates, making it ..
0.70€
Ex Tax:0.58€
Out of Stock
Stock: Out of Stock
Model: mosfet-module
This IRF520 MOSFET module can control DC loads using a signal from an Arduino, ESP32, Raspberry Pi, controller board or other microcontroller. It can be used to switch or regulate devices such as fans, LED lighting, small pumps and other low-voltage accessories using PWM.
The module simplifies MO..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: ISO-7380-Tornillo
ISO 7380 button head hex socket screw, manufactured from class 10.9 steel with a black oxide finish. Its low rounded head provides a neat appearance and protrudes less than a conventional cylindrical socket head.
It is suitable for enclosures, panels, aluminium profiles, printed parts, 3D printer..
0.00€
Ex Tax:0.00€
Stock: In Stock
Model: KFL000
Description
The KFL000 is an oval two-bolt flange bearing unit for 10 mm shafts. Its zinc alloy housing can be mounted on a plate, frame or machine side panel to support a rotating shaft.
The bearing is locked to the shaft with grub screws. Its insert can accommodate a small amount of angular adju..
2.14€
Ex Tax:1.77€