M5 Sliding T-Slot Nut for European 30-Series Profile, 8 mm Slot

Description

Nickel-plated carbon-steel M5 sliding nut for HTA3D European 30-series profiles. It can be used to secure brackets, plates, supports and other accessories on structures built from 3030 or 3060 profiles.

Key features

• Family: European 30-series profile.
• Nominal slot: 8 mm.
• Thread: M5.
• Material: nickel-plated carbon steel.
• Nominal body: 16 × 16 mm.
• Overall height: 6 mm.
• Central recess: 8 mm.
• Upper step: 2 mm.
• Approximate weight: 8.2 g.

Compatibility

Directly compatible with our 3030 and 3060 structural profiles and HTA3D 30-series accessories using M5 fasteners.

M5 threads are also available in other profile families, but their nuts are not dimensionally interchangeable.

Installation

• Insert the nut longitudinally through an open end.
• Plan its position before fitting end caps or connectors.
• Use an M5 screw with a length appropriate for the accessory.
• Check that the screw does not bottom out against the profile.
• Square the structure before tightening the joints.

Other available threads

Also available with M3, M4 and M6 threads.

Package contents

• 1 × M5 sliding nut for 30-series profile.