- Stock: 17
- Model: Boquilla-0.4-k1
Diameter:
0.4mm
0.6mm
0.4 mm Brass Nozzle for Creality K1, K1 Max and Ender 3 V3 KE
Brass nozzle for the hotend assembly used by Creality in the K1, K1 Max and Ender 3 V3 KE, with a nominal 0.4 mm outlet and 1.75 mm filament. It is a replacement part for a worn nozzle or for changing the outlet diameter.
Compatibility is based on the nozzle and hotend geometry, not only on filament diameter. Before installation, check that your machine still uses the compatible K1-family hotend and that the length and contact area match. Do not automatically extend compatibility to the Ender 3 V3, K1C, K2 or other revisions with a different nozzle system.
Features and use
- Material: brass.
- Nominal outlet diameter: 0.4 mm.
- Filament: 1.75 mm.
- Use: replacement and maintenance of the compatible hotend.
Brass offers good machinability and thermal transfer for non-abrasive filaments such as PLA, PETG or ABS. It is not suitable for prolonged use with abrasive filaments such as carbon fibre, glass fibre, metal, wood or mineral-filled materials; use a nozzle specifically designed for wear in those cases.
After replacing it, recalibrate the first layer and check flow. Tightening and sealing must follow the hotend procedure, normally with the assembly at the manufacturer's specified temperature and with appropriate burn precautions.
For a larger outlet, see the 0.6 mm version.
