Stock: In Stock
Model: HB-fysetc-220x220-24v
FYSETC 220 × 220 mm, 24 V magnetic heated bed designed to work with a removable flexible spring-steel build plate. The magnets are embedded in the rear of the heated bed, removing the need to install a separate adhesive magnetic base.
It is a practical solution for building or upgrading a 3D prin..
45.99€
Ex Tax:38.01€
Stock: In Stock
Model: fleje-templado-0,5mm
0.5 mm Flexible Hardened Spring Steel Sheet for 3D Printing
Flexible hardened spring steel sheet, also known as spring steel plate, for use as the top surface of a magnetic print bed. Its flexible format allows it to be removed from the printer and bent to help release printed parts.
It can be pla..
2.95€
Ex Tax:2.44€
Only a few units in stock
-8 %
Stock: In Stock
Model: CC-Silicona100x100-24V
100 × 100 mm, 24 V, 60 W adhesive flexible silicone heater for bonding beneath a compatible aluminium plate to build a compact heated bed. It is supplied wired and includes a 100K B3950 NTC thermistor with an XH2.54 connector.
Its nominal current is 2.5 A, making it suitable for small printers, tes..
12.50€ 11.50€
Ex Tax:9.50€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado
100K NTC Beta 3950 thermistor for temperature measurement in hotends, heated beds and other compatible thermal control systems. It is supplied pre-wired with a 1 metre cable and a Dupont connector, making it suitable for replacement and new FDM 3D printer installations.
Features
Sensor type: NTC..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado-XH
Pre-wired 100K NTC Beta 3950 thermistor for temperature measurement in compatible hotends, heated beds and thermal control projects. It includes a 1 metre cable and a 2-pin XH connector.
Features
Type: NTC thermistor.
Nominal resistance: 100K at 25 °C.
Beta value: 3950.
Cable length: 1 m.
Co..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Cable-16AWG-50cm-01
Pair of flexible 16 AWG wires, one red and one black, prepared for connecting a heated bed to a 3D printer controller board. Each conductor is approximately 50cm long and has a pre-insulated pin terminal fitted to one end for connection to a compatible terminal block.
The wires use stranded tinne..
2.25€
Ex Tax:1.86€
Only a few units in stock
-17 %
Stock: In Stock
Model: CC-Silicona300x300-24V
300 × 300 mm, 24 V, 300 W adhesive flexible silicone heater for bonding beneath a compatible aluminium plate and building a large-format heated bed. It is supplied wired and includes a 100K B3950 NTC thermistor with an XH2.54 connector.
The adhesive format transfers heat to the plate without a bulk..
41.50€ 34.50€
Ex Tax:28.51€
Stock: In Stock
Model: CC-Silicona300x300-220V
300 × 300 mm, 220 V, 500 W adhesive flexible silicone heater for bonding beneath a compatible aluminium plate. It is wired with approximately 1 m leads and a 100K NTC sensor using an XH2.54 connector.Mains voltage: installation requires a qualified person, suitable AC switching, electrical protectio..
29.99€
Ex Tax:24.79€
New
Stock: In Stock
Model: CC-Silicona350x350-220V
350 × 350 mm, 220 V, 750 W adhesive silicone heater for large-format 3D-printer beds, wired with approximately 1 m leads and an XH2.54 100K NTC.Mains voltage: requires professional installation, AC switching, fuse/breaker, RCD, protective earth and an independent thermal fuse. It cannot be driven di..
37.50€
Ex Tax:30.99€
New
Stock: In Stock
Model: CC-Silicona400x400-220V
400 × 400 mm, 220 V, 800 W adhesive flexible silicone heater for a large aluminium bed plate. It includes approximately 1 m wiring and a 100K NTC with XH2.54 connector.Mains voltage: installation requires a qualified person, AC switching, mains protection, plate earthing and a thermal cut-out indepe..
42.75€
Ex Tax:35.33€
Only a few units in stock
-12 %
Stock: In Stock
Model: MK3-400-24V+
400 × 400 mm aluminium-core MK3 heated bed for large-format 3D printers. It is 3 mm thick, operates at 24 V and is rated at approximately 260 W. A roughly 90 cm cable and 100 kΩ temperature sensor are fitted.Nominal current is approximately 10.8 A and equivalent resistance about 2.22 Ω. Mounting cen..
62.00€ 54.50€
Ex Tax:45.04€
Only a few units in stock
-7 %
Stock: In Stock
Model: MK3-500-24V+
500 × 500 × 3 mm aluminium MK3 heated bed for large-format 24 V FDM projects. Rated power is approximately 280 W; nominal current is about 11.7 A and equivalent resistance about 2.06 Ω. It includes roughly 90 cm of wiring and a 100 kΩ sensor.Weight is approximately 2105 g. Mounting centres are 460 m..
73.50€ 68.50€
Ex Tax:56.61€