M3 Sliding T-Slot Nut for European 30-Series Profile, 8 mm Slot

Description

Nickel-plated carbon-steel M3 sliding nut for HTA3D European 30-series profiles with a nominal 8 mm slot. It is inserted through an open end and moved to the required mounting position.

The M3 thread is suitable for sensors, electronics and small brackets on structures built from 3030 or 3060 profiles.

Key features

• Family: European 30-series profile.
• Nominal slot: 8 mm.
• Thread: M3.
• Material: nickel-plated carbon steel.
• Nominal body: 16 × 16 mm.
• Overall height: 6 mm.
• Central recess: 8 mm.
• Upper step: 2 mm.
• Approximate weight: 7.81 g.

Compatibility

Directly compatible with our 3030 and 3060 structural profiles and HTA3D 30-series accessories using M3 fasteners.

Installation

• Insert the nut longitudinally through an open end.
• Slide it to the mounting point.
• Use an M3 screw of suitable length.
• Prevent the screw from bottoming out before clamping the accessory.
• Tighten progressively.

Other available threads

Also available with M4, M5 and M6 threads.

Package contents

• 1 × M3 sliding nut for 30-series profile.