Recommended
-29 %
Stock: In Stock
Model: HTA3D-Extrusor
Extrusor directo HTA3D V2 desarrollado para la 3DSteel. Reúne doble arrastre para filamento de 1,75 mm, hotend V6 all-metal, 3DTouch, sensor mecánico de presencia de filamento y refrigeración de capa en un conjunto que se entrega montado. Aunque es un diseño veterano, sigue siendo una mejora complet..
99.00€ 69.99€
Ex Tax:57.84€
Stock: In Stock
Model: Termistor-104NT-4-GH
Fresa 3D 104NT-4 thermistor with a 100 mm cable and 2-pin GH1.25 connector. It is designed for temperature measurement systems compatible with the 104NT-4 electrical curve and this connection format.
Features
Type: 104NT-4 NTC thermistor.
Cable length: 100 mm.
Connector: 2-pin GH1.25.
Brand: ..
3.35€
Ex Tax:2.77€
Out of Stock
Stock: Out of Stock
Model: Termistor-104NT-4-XH
Fresa 3D 104NT-4 thermistor with a 145 mm cable and 2-pin XH2.54 connector. It is intended for temperature measurement in hotends and other systems compatible with the 104NT-4 electrical curve.
Features
Sensor type: 104NT-4 NTC thermistor.
Cable length: 145 mm.
Connector: 2-pin XH2.54.
Brand:..
3.35€
Ex Tax:2.77€
Stock: In Stock
Model: Metal-Sherpa-V1.5
FYSETC Metal Sherpa Mini V1.5 CNC 6.25:1 Extruder with 36 mm Motor
The FYSETC Metal Sherpa Mini V1.5 is a compact dual-gear extruder with a CNC-machined aluminium housing and 6.25:1 reduction. It is designed for direct-drive or Bowden configurations that have a compatible mounting bracket, hotend..
89.99€
Ex Tax:74.37€
Stock: In Stock
Model: Sherpa-V1.5
The FYSETC Sherpa Mini V1.5 is a compact 1.75mm filament extruder supplied with a NEMA 14 motor and dual-drive filament gears. Its small package is particularly useful for direct-drive toolheads where moving mass must be limited without giving up a geared transmission.
This revision combines an 8..
47.50€
Ex Tax:39.26€
Out of Stock
Stock: Out of Stock
Model: Kit-Bloque-Kobra3
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, thermistor, bimetal heatbreak, 0.4 mm Brass nozzle and silicone sock.
It is intended to connect to the original Kobra 3 printhead. It should not be..
12.70€
Ex Tax:10.50€
-30 %
Stock: In Stock
Model: HTA3D-Extrusor
A direct extruder designed by HTA3D for the HTA3D P3Steel and projects based on the classic Prusa i3 architecture. It combines an MK8 drive for 1.75 mm filament, a close-fitting filament guide and an all-metal V6 hotend. It is a simple, proven solution for maintaining a P3Steel or upgrading an older..
55.99€ 38.99€
Ex Tax:32.22€
-23 %
Stock: In Stock
Model: HTA3D-DUAL-EXTRUDER
The HTA3D dual Bowden extruder for P3Steel combines two independent MK8 drive systems with a two-nozzle Chimera-style hotend to add dual extrusion to a compatible P3Steel. It can print in two colours, combine a model material with a support material, or dedicate each tool to a different filament, pr..
95.00€ 73.50€
Ex Tax:60.74€
Stock: In Stock
Model: Orbiter-V3
The LDO Motors Smart Orbiter V3 combines a planetary dual-drive extruder, motor, high-flow hotend and Klipper-oriented smart functions in a compact direct-drive toolhead. Its short filament path, close-fitting guides and three-position tensioner support both rigid and flexible materials, while the c..
128.50€
Ex Tax:106.20€
Stock: In Stock
Model: Dual-4.1-Throat
This stainless-steel heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater block. Its 4.1 mm internal bore allows a 4 mm PTFE tube to reach the nozzle and is intended for 1.75 mm filament.
The PTFE tube guides the filament along th..
3.99€
Ex Tax:3.30€
Stock: In Stock
Model: Bimetal-M6-D7
Bimetal all-metal heatbreak for dual V6-style hotends, with an M6 × 1 thread for the heater block and a smooth Ø6.95mm upper body for retention in a heatsink designed for nominal Ø7mm heatbreaks.
Its construction combines titanium in the thermal bridge with copper in the cold section. Titanium li..
3.20€
Ex Tax:2.64€
Out of Stock
Stock: Out of Stock
Model: Metal-Hotend-A1
Metal Hotend Kit, Compatible with Bambu Lab A1 Mini.Features:High-Quality Material: The integrated hotend kit is made of hardened steel with a 0.4mm nozzle, specifically designed for the Bambu Lab A1 Mini 3D printer. It offers high temperature resistance and durability.Improved Print Quality: The ho..
15.25€
Ex Tax:12.60€