Stock: In Stock
Model: Kit-ceramico-K1
60 W ceramic hotend kit for replacing the heating and melt-zone assembly on Creality K1 and K1 Max printers fitted with the matching earlier-generation geometry and connectors. It includes the surround heater, thermistor, 0.4 mm nozzle, silicone sock, heatsink and mounting parts.
Check the revision..
11.60€
Ex Tax:9.59€
Stock: In Stock
Model: Airtripper Bowden BSP
The Airtripper V3 BSP is a direct-drive Bowden extruder for 1.75mm filament. Its MK8 drive gear mounts directly onto the NEMA 17 motor shaft without reduction gears, while the extruder remains attached to the printer frame and feeds filament to the hotend through a PTFE tube.
This arrangement red..
8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Dual-All-Metal-Throat
This stainless-steel all-metal heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater block. It is suitable for 1.75 mm filament and keeps the PTFE tube away from the hottest area of the assembly.
Because the PTFE tube does not exte..
3.99€
Ex Tax:3.30€
Stock: In Stock
Model: Hermit-crab-V2
The BIGTREETECH Hermit Crab V2.0 CAN is a manual quick-change platform designed to keep several toolheads prepared and swap them without dismantling every carriage component. It includes one electronic fixed plate and three removable tool plates for compatible hotends, extruders, probes or other too..
158.50€
Ex Tax:130.99€
Stock: In Stock
Model: H2 V2S
BIQU H2 V2S Dual-Gear Direct Extruder for 1.75 mm Filament
The BIQU H2 V2S is a compact direct extruder with integrated hotend for 1.75 mm filament. It combines dual drive gears, a 7:1 reduction and a bi-metal heatbreak in a toolhead designed to convert a compatible machine to direct extrusion wi..
76.45€
Ex Tax:63.18€
Stock: In Stock
Model: H2 V2X
BIQU H2 V2X 7:1 Direct Extruder for Voron StealthBurner and EVA 3
The BIQU H2 V2X is a lightweight, compact direct extruder designed for modular toolheads such as Voron StealthBurner and EVA 3. It combines the motor, 7:1 gearbox and dual drive gears in a 145 g machined aluminium body, reducing mo..
58.25€
Ex Tax:48.14€
Stock: In Stock
Model: Nebula
The BIQU Nebula is a compact 143 g direct-drive extruder combining an 11.25:1 planetary reduction, dual drive gears, a filament sensor, programmable button and RGB lighting. It targets lightweight CoreXY toolheads and DIY builds that need controlled filament feed together with assisted loading and u..
58.75€
Ex Tax:48.55€
Stock: In Stock
Model: Teflón-4-2-negro
Black 2×4 mm PTFE tube for guiding 1.75 mm filament in 3D printers and Bowden systems. Its low-friction surface helps filament move when the machine uses fittings for 4 mm outside-diameter tubing.
It is supplied in 1 m per unit lengths. You can select several units to request a longer continuous se..
1.65€
Ex Tax:1.36€
Stock: In Stock
Model: Teflón-4-2-azul
Blue 2×4 mm PTFE tube for guiding 1.75 mm filament in 3D printers and Bowden systems. Its low-friction surface helps filament move between the feeder and hotend when the machine uses fittings for 4 mm outside-diameter tubing.
It is supplied in 1 m per unit lengths. You can select several units to..
1.65€
Ex Tax:1.36€
Stock: In Stock
Model: Dual-Gears-5mm-ID
Dual-drive gear set for a 1.75 mm filament extruder, comprising a primary gear for a 5 mm motor shaft and a secondary gear supported by two needle bearings. Both sides grip the filament and rotate in sync, improving force transfer and reducing slip compared with a single drive gear.
Its geometry ..
6.15€
Ex Tax:5.08€
Out of Stock
Stock: Out of Stock
Model: Boquilla-Volc-0.4
Description
Brass nozzle with an extended Volcano-type geometry, M6 thread and 0.4 mm outlet. It is designed for hotends using Volcano-style nozzles and 1.75 mm filament.
The 0.4 mm diameter provides a good balance between detail, ease of configuration and printing speed. It is a versatile choice ..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-0.5
Description
Brass nozzle with an extended Volcano-type geometry, M6 thread and 0.5 mm outlet. It is intended for Volcano and compatible hotends using 1.75 mm filament.
The 0.5 mm size sits between the standard detail of a 0.4 mm nozzle and the increased flow of a 0.6 mm nozzle. It is useful for fu..
0.85€
Ex Tax:0.70€