Stock: In Stock
Model: Resistencia-ceramica-Rapido2F
Replacement ceramic heating element for the Phaetus RAPIDO 2F hotend. It operates at 24 V with a nominal power of 115 W and is intended to replace the original heater during repair or maintenance.
Main features
Rated voltage: 24 V.
Rated power: 115 W.
Ceramic heating element.
1 metre silico..
10.25€
Ex Tax:8.47€
Stock: In Stock
Model: Resistencia 24V 40W
24 V, 40 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. This configuration is widely used in 24 V V6-style hotends and is suitable as a replacement when dimensions, voltage, power, cable length and electrical connection all match.
The cartridge has a metal sheat..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: ResistenciaPlana-24V-48W
flat ceramic heater rated for 24 V and a nominal 48 W, designed as a compatible replacement for Bambu Lab X1 and X1 Carbon hotends. It can replace a damaged heater while retaining the electrical specification and architecture of the original hotend assembly.
This is a compatible replacement manuf..
5.80€
Ex Tax:4.79€
Stock: In Stock
Model: Resistencia 24V 50W
24 V, 50 W cylindrical heater cartridge for hotend blocks with a nominal 6 mm heater bore. Its power rating is suitable for extrusion systems designed or properly adapted to control a 50 W load.
It can be used as a replacement or for a custom hotend assembly, but it must not be treated as a direc..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Resistencia 24V 60W
24 V, 60 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its 6 × 20 mm body and 1 metre cable make it suitable as a replacement or for custom assemblies that are mechanically, electrically and thermally designed for this power level.
Compared with a common lower-power cartridg..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 70W
24 V, 70 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. This high-power variant is intended for systems that can both use and safely handle it: before replacing a 40 or 60 W heater, check the controller output, power supply, terminals, wiring, sensor, block and thermal configura..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 80W
24 V, 80 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its high power may shorten heat-up time and improve thermal recovery, but the hotend and entire electrical path must be verified as suitable before it can be used safely.
Technical specifications
..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: Termistor100K ohm NTC 3950-PT100-3mm-Dupont
100K NTC Beta 3950 hotend thermistor protected by a 3 mm cylindrical 304 stainless-steel capsule. The encapsulation provides a more robust installation than an exposed bead thermistor and fits heater blocks designed for sensors of this diameter.
Features
Type: 100K NTC Beta 3950 thermistor.
304..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Termistor100K-PT100-3mm-XH
100K NTC Beta 3950 hotend thermistor with a 3 mm cylindrical 304 stainless-steel capsule, 1 metre cable and XH connector. Its encapsulated construction provides a robust fit in heater blocks designed for cylindrical temperature sensors.
Features
100K NTC Beta 3950 thermistor.
304 stainless-stee..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Kit-ceramico-K1
60 W ceramic hotend kit for replacing the heating and melt-zone assembly on Creality K1 and K1 Max printers fitted with the matching earlier-generation geometry and connectors. It includes the surround heater, thermistor, 0.4 mm nozzle, silicone sock, heatsink and mounting parts.
Check the revision..
11.60€
Ex Tax:9.59€
Stock: In Stock
Model: Airtripper Bowden BSP
The Airtripper V3 BSP is a direct-drive Bowden extruder for 1.75mm filament. Its MK8 drive gear mounts directly onto the NEMA 17 motor shaft without reduction gears, while the extruder remains attached to the printer frame and feeds filament to the hotend through a PTFE tube.
This arrangement red..
8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Dual-All-Metal-Throat
This stainless-steel all-metal heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater block. It is suitable for 1.75 mm filament and keeps the PTFE tube away from the hottest area of the assembly.
Because the PTFE tube does not exte..
3.99€
Ex Tax:3.30€