Stock: In Stock
Model: Boquilla-Volc-0.6
Description
Brass Volcano-type nozzle with an M6 thread and 0.6 mm outlet, designed for 1.75 mm filament extrusion systems.
The 0.6 mm opening supports wider extrusion lines and thicker layers than a 0.4 mm nozzle. It is a balanced option for reducing print times on medium and large parts, produci..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-0.8
Description
Brass Volcano-type nozzle with an M6 thread and 0.8 mm outlet for 1.75 mm filament. It deposits wider extrusion lines and a greater volume of material per layer than general-purpose nozzles.
It is particularly suitable for large parts, rapid prototypes, vase-mode models and functional ..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-1
Description
Brass Volcano-type nozzle with an M6 thread and 1.0 mm outlet for 1.75 mm filament systems. It is intended for printing large parts using wide extrusion lines and thicker layers.
The 1.0 mm diameter can produce strong walls and reduce the number of required extrusion paths, although it..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Boquilla-Volc-1.2
Description
Brass Volcano-type nozzle with an M6 thread and 1.2 mm outlet for 1.75 mm filament. This is the largest diameter in the family and is intended for large parts, very wide extrusion lines and applications prioritising deposited volume and strength over detail.
It requires a hotend with s..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
Brass V6 heater block designed for temperature sensors with a 3 mm cylindrical encapsulation. Brass provides greater mechanical strength and higher thermal inertia, helping the hotend maintain a more stable temperature during printing.
Features
Material: brass.
Format: V6.
Nozzle thread: M6...
4.85€
Ex Tax:4.01€
-27 %
Stock: In Stock
Model: V6Dual-Disipador
Dual aluminium heatsink for building a Chimera-style dual-extrusion toolhead with two independent hotend assemblies. It supports two filament paths and allows each hot zone to operate at a different temperature when completed with suitable components and electronics.
The body measures approximate..
8.25€ 5.99€
Ex Tax:4.95€
FLASH
-20 %
Stock: In Stock
Model: V6Dual-Full
This Chimera-style dual hotend is designed for Bowden extrusion systems using 1.75 mm filament. It features two independently heated nozzles, allowing dual-color printing, multi-material printing or the use of soluble support materials with different extrusion temperatures.
Features
Dual..
25.00€ 19.99€
Ex Tax:16.52€
Stock: In Stock
Model: V6Dual-M
This Chimera-style dual hotend is designed for Bowden extrusion systems using 1.75 mm filament. It features two independently heated nozzles, allowing dual-color printing, multi-material printing or the use of soluble support materials with different extrusion temperatures.
Features
Dual..
23.00€
Ex Tax:19.01€
Stock: In Stock
Model: V6-Heatsink-Compact
Compact aluminium heatsink for building a hotend with V6-style components. It has an M7 × 1 lower heatbreak thread, a 4.2mm internal guide and an integrated pneumatic retention system for PTFE tubing with a 4mm outside diameter.
It can be used in Bowden configurations and in certain direct-drive ..
2.50€
Ex Tax:2.07€
Recommended
-37 %
Stock: In Stock
Model: HotendV6-HQ
Compact V6 hotend for 1.75 mm filament, configured and assembled by HTA3D with your selected components. Choose the heatbreak, heater block, nozzle, heater cartridge, thermistor connector and PTFE length to suit the material, power system and printer installation.
This is not a fixed configuratio..
39.00€ 24.50€
Ex Tax:20.25€
Stock: In Stock
Model: Hotend-Vol
Configurable Volcano-type hotend for higher-flow 3D printing with 1.75 mm filament. Its extended heater block and Volcano nozzle provide a longer heated path than a conventional V6 hotend, helping to melt more material per second when the rest of the system can also deliver it.
Select heater volt..
19.95€
Ex Tax:16.49€
-60 %
Stock: In Stock
Model: Teflón-4-1.9-red
Red 1.9 × 4 mm PTFE Tube for 1.75 mm Filament
Red polytetrafluoroethylene (PTFE) tube with a 1.9 mm internal diameter and 4 mm external diameter. It is mainly intended to guide 1.75 mm filament in direct-drive extruders, where the smaller internal diameter helps guide the filament with limited clea..
6.00€ 2.40€
Ex Tax:1.98€