Stock: In Stock
Model: Thermistor-PT1000-barehead-Rapido2F
Replacement PT1000 Bare Head temperature sensor for the Phaetus RAPIDO 2F hotend. It replaces the original sensor while retaining the PT1000 RTD measurement system intended for this hotend.
Features
Type: PT1000 RTD sensor.
Replaceable Bare Head format.
Designed for the Phaetus RAPIDO 2F syste..
10.89€
Ex Tax:9.00€
-4 %
Out of Stock
Stock: Out of Stock
Model: Rapido-HF-2.0F-Blue
Phaetus RAPIDO 2 hotend in the HF high-flow configuration, featuring a blue heatsink and designed for 1.75 mm filament. Its extended heating zone is intended for fast printers that require more consistent material melting than a conventional hotend can provide.
This product is the RAPIDO Hotend 2..
99.00€ 94.99€
Ex Tax:78.50€
Only a few units in stock
-6 %
Stock: In Stock
Model: Rapido-UHF-2.0F-Black
Phaetus RAPIDO 2 hotend in the UHF ultra-high-flow configuration, featuring a black heatsink and designed for 1.75 mm filament. Its extended melting zone is intended for fast printers and applications where a conventional hotend may become the limiting factor for material flow.
This product is th..
105.99€ 99.99€
Ex Tax:82.64€
Stock: In Stock
Model: Nozzle-1.75-PlatedCopper-0.6
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
6.50€
Ex Tax:5.37€
Stock: In Stock
Model: Teflon-tube-4/2.5-1m
This PTFE guide tube has a 4 mm outer diameter and a 2.5 mm inner diameter. It is suitable for guiding 1.75 mm filament in 3D printers, Bowden extrusion systems and auxiliary paths between the spool, a dry box and the extruder.
Its inner diameter provides more clearance than a conventional 4 × 2 ..
1.02€
Ex Tax:0.84€
Stock: In Stock
Model: Teflon-tube-4/3-1m
This PTFE guide tube has nominal dimensions of 4 mm outer diameter and 3 mm inner diameter. Its wide internal passage makes it suitable as a low-restriction filament guide, particularly between a spool or dry box and the extruder.
It can be used with 1.75 mm filament when a generous clearance is ..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Teflon-tube-6/4-1m
This PTFE tube with a 6 mm outer diameter and 4 mm inner diameter is designed for Bowden extrusion systems using 3.00 mm filament. Its low-friction surface promotes smooth filament movement and reliable material feeding.
Features
Manufactured from low-friction PTFE.
Compatible with ..
2.20€
Ex Tax:1.82€
Stock: In Stock
Model: Teflon-tube-4/2-1m
This PTFE tube is designed for guiding 1.75 mm filament in Bowden systems and other FDM 3D printing applications. Manufactured from polytetrafluoroethylene (PTFE), it offers a low-friction surface that promotes smooth and consistent filament feeding.
Features
Compatible with 1.75 mm fila..
1.10€
Ex Tax:0.91€
Out of Stock
Stock: Out of Stock
Model: HGX-Lite-hardwareSet
Pulley and hardware set for the HGX-lite extruder.The HGX-LITE extruder is designed to provide exceptional power and precision for your 3D printer. With a 9.5:1 gear ratio, this extruder can instantly deliver superpower, with an extraction force exceeding 60N.Compatible with Creality, Ender3 V2, CR1..
13.25€
Ex Tax:10.95€
Out of Stock
Stock: Out of Stock
Model: Block-Rapido2F
Original replacement heater block for the Phaetus RAPIDO 2F hotend. It replaces a damaged block during repair or maintenance while preserving the melting-zone geometry designed for this specific model.
Features
Specific replacement part for the Phaetus RAPIDO 2F hotend.
Extended heating-zone ..
27.45€
Ex Tax:22.69€
Stock: In Stock
Model: Aislante-Hotend
This rock wool insulation is designed to wrap the hotend heater block, reducing heat loss during printing. Its low thermal conductivity helps maintain a more stable temperature while improving heating efficiency.
Features
Reduces heat loss from the heater block.
Helps maintain a sta..
0.19€
Ex Tax:0.16€
Out of Stock
Stock: Out of Stock
Model: Polea-doble-E-C
Set of two metal gears for the extruder of selected Creality printers in the K1 and Ender-3 V3 families. It replaces damaged or worn filament-drive wheels without necessarily buying a complete extruder assembly. Includes two gears and two screws; motor, housing and hotend are not included.
Ch..
7.50€
Ex Tax:6.20€