Out of Stock
Stock: Out of Stock
Model: Nevermore Scorch
Nevermore Scorch is an advanced air filtration media, designed for the unique demands of 3D printer chambers, especially at elevated temperatures. Traditional carbon filters become less effective above 50°C and are significantly less efficient above 60°C. Nevermore Scorch adds the heat resistance re..
10.75€
Ex Tax:8.88€
Stock: In Stock
Model: Adhesive-Foam
Self-adhesive thermal insulation for the underside of a heated bed, combining a foam layer, an aluminium-finished surface and an adhesive backing. Its nominal format suits many square 3D-printer beds, provided that their dimensions, mounting holes and cable position are checked first.
By reducing..
1.95€
Ex Tax:1.61€
Stock: In Stock
Model: Silicona-18mm
Silicone damping spacer for mounting a heated bed on a 3D printer’s Y carriage. Its semi-rigid body maintains the distance between both components while allowing a limited amount of compression for adjustment.
It may replace conventional springs when a less elastic mounting arrangement with reduc..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: Silicona-Boquilla-A1-Mini
Compatible replacement silicone nozzle wiper for the Bambu Lab A1 Mini. It forms part of the heatbed wiping system and helps remove residue from the hotend tip during automatic preparation before printing.
This is a compatible alternative and not an original Bambu Lab spare part. This listing cov..
1.20€
Ex Tax:0.99€
Stock: In Stock
Model: Silicona-Boquilla-A1
Compatible replacement silicone nozzle wiper for the Bambu Lab A1. This small part is fitted to the wiping support beside the heatbed and contacts the hotend tip during automatic print preparation, helping remove filament residue before bed levelling and the first layer.
This is a compatible alte..
1.25€
Ex Tax:1.03€
-21 %
Stock: In Stock
Model: Relé-10A
SSR-40DA solid-state relay for controlling an AC load from a 3 to 32 V DC signal. The unit is marked for a 24 to 380 V AC output and a nominal current of 40 A.
Confirmed unit data
TypeSSR-40DA: DC control and AC load
Control input3–32 V DC
Output24–380..
10.75€ 8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Pinza-abrazadera
Stainless steel spring clip designed to secure a removable glass, mirror or other rigid build surface to a 3D printer heated bed.
Its narrow design occupies little space around the edge of the build surface and can be fitted or removed without screws. Clamping pressure is provided by the elastici..
0.75€
Ex Tax:0.62€
Stock: In Stock
Model: Aislante-Térmico-PET
Flexible thermal insulation designed for installation underneath a 3D printer heated bed. Its three-layer construction helps reduce downward heat loss, contributing to more efficient heating and improved temperature stability.
This is a passive component: it requires no electrical power and may b..
1.19€
Ex Tax:0.98€
Stock: In Stock
Model: LED-lamp
Ultra-thin, circular and dimmable USB LED lamp with three selectable light tones: warm, neutral and cool. Its compact format and in-line controller make it suitable for illuminating lamps, shades and decorative objects printed in translucent filament, as well as providing auxiliary light for a 3D pr..
5.99€
Ex Tax:4.95€
Stock: In Stock
Model: Extensor-USB-2.0
USB 2.0 extension cable approximately 30cm long, with a USB Type-A male connector at one end and a panel-mount USB Type-A female socket at the other.
It moves an internal USB port to the outside of an enclosure, cover or control panel, providing access without opening the electronics compartment...
1.40€
Ex Tax:1.16€
New
Out of Stock
Stock: Out of Stock
Model: ViVid
The BIGTREETECH ViViD is a modular multi-material system with integrated filament drying for 3D printing, designed for 3D printers running Klipper firmware. This system combines advanced filament management with built-in drying, providing a complete solution for complex multi-color and multi-materia..
342.50€
Ex Tax:283.06€
New
Stock: In Stock
Model: Boli3D-1.75mm
WINKLE 3D Pen for 1.75 mm filament, with LCD screen, speed control and separate buttons for loading and unloading material. It lets you draw on a surface or in the air, creating figures, letters, decorations and small pieces by hand.
It is a creative tool for getting started with 3D making withou..
18.99€
Ex Tax:15.69€