Stock: In Stock
Model: 16AWG-negro-1m
Black 16 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexible construction simplifies routing inside electroni..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: 16AWG-rojo-1m
Red 16 AWG flexible electrical wire with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making custom wiring in 3D printers, CNC machines, electronics, robotics and DC systems.
Its flexibility simplifies installation inside electronics enclosure..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Kapton20mm
Kapton-type polyimide adhesive tape measuring 20mm wide and 33 metres long. It is designed to provide electrical insulation, masking and thermal protection during electronics, 3D printing, soldering and BGA or SMD component-rework tasks.
Its polyimide film and silicone adhesive withstand temperat..
2.75€
Ex Tax:2.27€
Out of Stock
Stock: Out of Stock
Model: Cable-3DTouch-2m
Two-metre cable for connecting a 3DTouch automatic bed-levelling sensor to a 3D printer controller board. It is useful for larger machines or for routing the probe wiring neatly through the toolhead, drag chain and frame to the electronics enclosure.
The sensor end has a white 5-position connecto..
3.15€
Ex Tax:2.60€
Stock: In Stock
Model: Kapton30mm
Kapton-type polyimide adhesive tape measuring 30mm wide and 33 metres long. It provides electrical insulation, thermal protection and masking for 3D printing, electronics, soldering and BGA or SMD rework.
It is made from polyimide film with a silicone adhesive and has a specified heat resistance ..
2.99€
Ex Tax:2.47€
New
Stock: In Stock
Model: Destornilladores-Allen
Set of four metric hex drivers in 1.5, 2.0, 2.5 and 3.0 mm sizes. Their straight-handle format is convenient for assembling, adjusting and maintaining 3D printers, RC models, small mechanisms, electronics enclosures and DIY projects that use internal-hex fasteners.
Each tool has a straight hex ti..
11.99€
Ex Tax:9.91€
Stock: In Stock
Model: 4x-clip
This set of four reversible metal clamps is designed to securely hold print surfaces such as glass or build plates onto a heated bed. Their compact design minimizes interference with the print area while allowing quick installation and removal whenever needed.
Features
Set of 4 reversibl..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Espaciador-5x10x3
Cylindrical aluminium spacer designed to provide an accurate 3 mm separation in mechanical assemblies using M5 hardware. It can be used in V-Slot wheel carriages, 3D printers, CNC machines and other motion or structural assemblies.
Its 10 mm outer diameter provides a wide supporting surface, whil..
0.05€
Ex Tax:0.04€
Stock: In Stock
Model: ZShaft-Voron
Machined 5 mm diameter and 30 mm long pin for the mechanical Z endstop used on Voron printers.
Its primary compatibility is with the Voron Trident. It may also be used on equivalent Voron 2.4 mechanical Z endstop assemblies when the mount height, support and pin travel are suitable.
..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Espaciador-5x8x10
Cylindrical aluminium spacer designed to provide a fixed 10 mm separation in assemblies using M5 hardware. It is suitable for V-Slot carriages, 3D printers, CNC machines and other mechanisms where components must be accurately spaced or positioned.
Its 8 mm outer diameter facilitates installation..
0.11€
Ex Tax:0.09€
Stock: In Stock
Model: Espaciador-5x8x6
Cylindrical aluminium spacer for V-Slot mechanisms and mechanical assemblies using M5 hardware. It provides a fixed 6 mm separation between a wheel, bearing, plate, bracket or another component.
Its 8 mm outer diameter allows installation in areas with less available space than a 10 mm spacer, pr..
0.11€
Ex Tax:0.09€
Stock: In Stock
Model: Kapton5mm
Kapton-type polyimide adhesive tape measuring 5mm wide and 33 metres long. Its narrow format is suitable for insulating, masking and securing small components in 3D printers, electronics and BGA or SMD soldering and rework applications.
It combines an electrically insulating polyimide film with a..
1.20€
Ex Tax:0.99€