Stock: In Stock
Model: Placa2020-L
External L-shaped plate for joining and reinforcing two 20 series aluminium profiles in a flat 90° arrangement. Its five-hole pattern distributes the fastening across the slots of both profiles.
It is manufactured from aluminium alloy and has overall dimensions of 60 × 60 mm. The five 5.2 mm clea..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: Conector-L-2020
Flat metal L plate for building or reinforcing 90-degree joints between series 20 aluminium profiles. Its four holes distribute the fastening points across both arms and allow an existing frame to be reinforced from the outside whenever the profile slots remain accessible.
It is a compact solutio..
0.50€
Ex Tax:0.41€
Stock: In Stock
Model: Conector-L-3030
Flat metal L plate for building or reinforcing 90-degree joints between series 30 aluminium profiles. Its four holes distribute the fasteners across both arms and allow a frame to be reinforced from the outside whenever its profile slots remain accessible.
The 85 × 85 mm format suits 3D-printer f..
0.70€
Ex Tax:0.58€
Stock: In Stock
Model: Placa2020-T
External T-shaped plate for joining and reinforcing 20 series aluminium profiles. Its five-hole pattern allows it to be secured to the profile slots to create flat T joints for frames, supports and modular structures.
It is manufactured from aluminium alloy and measures 60 × 60 mm. The 5.2 mm cle..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: Conector-T-2020
External T-shaped metal plate designed to join 20 series aluminium profiles perpendicularly within the same plane. It is particularly useful when one profile terminates against the side or intermediate section of another, such as in cross-members, frame divisions and structural reinforcements.
It..
0.50€
Ex Tax:0.41€
Stock: In Stock
Model: Conector-T-3030
External T-shaped metal plate designed to join 30 series aluminium profiles perpendicularly within the same plane. It allows one profile to be fastened against the side or intermediate section of another, making it suitable for cross-members, frame divisions and structural reinforcement.
It has f..
0.70€
Ex Tax:0.58€
-73 %
Stock: In Stock
Model: P3Steel_HTA3D_HardwareSet
Hardware kit prepared for assembling and maintaining an HTA3D P3Steel 3D printer with a single-extruder configuration. It brings together the screws, nuts, washers and bed springs used in this version of the machine.
Suitable for building an HTA3D P3Steel, replacing worn hardware or keeping a mat..
20.00€ 5.35€
Ex Tax:4.42€
-71 %
Stock: In Stock
Model: P3Steel Dual HTA3D HardwareSet
Hardware kit prepared for an HTA3D P3Steel Dual 3D printer. It includes the additional fasteners used by this dual-extrusion build and combines its screws, nuts, washers and springs in one organised set.
The Dual version uses different quantities and a different combination of fasteners from the ..
20.00€ 5.75€
Ex Tax:4.75€
Out of Stock
Stock: Out of Stock
Model: Conector-L 2020
Internal L-shaped metal connector designed to join two 20 series aluminium profiles at a 90° angle. Both arms fit inside the profile slots, leaving the outside surfaces of the structure unobstructed.
It provides a compact alternative to external brackets when a discreet joint is required and the ..
0.27€
Ex Tax:0.22€
Stock: In Stock
Model: Conector-L 3030
Internal L-shaped metal connector designed to join two 30 series aluminium profiles at a 90° angle. It fits inside the slots, keeping the external profile surfaces unobstructed.
It is suitable for compact corners in frames, enclosures and modular structures whenever the ends of the profile slots ..
0.55€
Ex Tax:0.45€
Stock: In Stock
Model: Conector-linea-2020-M5
Internal metal connector designed to join two 20 series aluminium profiles longitudinally. It fits inside the slot across the joint between both profile sections and is locked with four M5 set screws.
It helps keep the profiles aligned and allows a structure to be extended without placing a joini..
0.50€
Ex Tax:0.41€
Stock: In Stock
Model: Conector-linea-3030-M6
Internal metal connector designed to join two 30 series aluminium profiles longitudinally. It fits inside the slot across the joint between both sections and is locked with four M6 set screws.
It aligns and extends profiles without occupying their external surfaces with joining plates, making it ..
0.70€
Ex Tax:0.58€