Stock: In Stock
Model: Nozzle-coated-0.4
V6-style brass nozzle for 1.75 mm filament, with a nominal 0.4 mm outlet and an external non-stick coating. It is a general-purpose size balancing detail, line strength, ease of tuning and print time.
The dark finish covers the outer cone and hex to help reduce plastic buildup and simplify cleani..
2.29€
Ex Tax:1.89€
Stock: In Stock
Model: V6-Heater-Block-PT100
V6-format heater block designed to accommodate temperature sensors with a nominal 3 mm cylindrical encapsulation, including NTC thermistors and RTD sensors such as the PT100. It also firmly secures the heater cartridge, providing stable installation and good thermal contact between the hotend compon..
0.90€
Ex Tax:0.74€
Stock: In Stock
Model: V6-Heater-Block
V6-format heater block designed to secure the heater cartridge and thermistor using independent clamping systems. This configuration provides stable installation of the components responsible for heating and monitoring the hotend temperature.
Features
Format: V6.
Nozzle thread: M6.
Thermisto..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: V6-Heatsink-with-all-metal-throat
This V6 heatsink features an integrated all-metal heatbreak and is designed for Bowden extrusion systems compatible with V5 and V6 hotends. Its compact design provides efficient heat dissipation while allowing the installation of a Bowden fitting for PTFE tubing.
Features
V6 heatsink wit..
2.90€
Ex Tax:2.40€
Stock: In Stock
Model: V6-Heatsink-with-4.2-throat
This V6 heatsink features an integrated PTFE-lined heatbreak, allowing the PTFE tube to extend down to the top of the nozzle. Designed for Bowden extrusion systems compatible with V5 and V6 hotends, it minimizes unsupported filament length for smoother and more reliable extrusion.
Features
..
2.90€
Ex Tax:2.40€
-44 %
Stock: In Stock
Model: Hotend-V6-1.75-PT100Termistor
Complete V6 hotend for 1.75 mm filament with an aluminium block, 3 mm encapsulated thermistor, silicone sock and dedicated cooling. It is supplied assembled, with selectable voltage, heatbreak and nozzle diameter to suit the printer and material.
The encapsulated sensor is better protected agains..
35.00€ 19.50€
Ex Tax:16.12€
Out of Stock
Stock: Out of Stock
Model: BlockV6-PlatedCopper
V6 Plated Copper heater block designed for temperature sensors with a 3 mm cylindrical encapsulation. It is made from a special high-temperature copper alloy and features a nickel-based coating that protects the surface and reduces plastic adhesion.
Features
Material: high-temperature copper a..
9.75€
Ex Tax:8.06€
Stock: In Stock
Model: V6-4.1-Throat
This stainless steel V6 heatbreak features an internal PTFE liner, allowing the PTFE tube to extend down to the top of the nozzle. It is designed for V6-compatible hotends using 1.75 mm filament.
Features
PTFE-lined heatbreak (not all-metal).
Manufactured from stainless steel.
..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: V6-316L-Throat
This stainless steel all-metal heatbreak is designed for hotends compatible with the V6 standard. Its thin transition section creates an efficient thermal barrier between the heatsink and the heater block, helping maintain stable filament melting while reducing heat transfer to the cold side of the ..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: Nozzle-1.75 Inox-0.4
Stainless-steel nozzle for 1.75 mm filament, with a nominal 0.4 mm outlet and short V6-style geometry. This is a versatile size for common print profiles and an alternative to brass where stainless steel is preferred.
Technical specifications
MaterialStainless steel..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Nozzle-1.75 Inox-0.6
Stainless-steel nozzle for 1.75 mm filament, with a nominal 0.6 mm outlet and short V6-style geometry. It supports wider lines and thicker layers than a 0.4 mm nozzle, reducing the number of passes on large parts when the hotend and extruder can supply the required flow.
Technical speci..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Bimetal-M6-M7
Bimetal all-metal heatbreak for V6-style hotends, with an M6 × 1 thread for the heater block and an M7 × 1 thread for the heatsink. It is designed for 1.75mm filament.
It combines a titanium section that limits heat transfer towards the cold zone with a copper section that conducts residual heat ..
3.50€
Ex Tax:2.89€