Stock: In Stock
Model: GT2-80Z-6mm
Fresa 3D GT2 80-tooth pulley for 6 mm belts, made of aluminium alloy and designed to mount on a 5 mm shaft with two grub screws.
Its large diameter is particularly useful as a driven pulley in belt reductions, rotary axes, CNC mechanisms, robotics and projects requiring increased mechanical resol..
3.18€
Ex Tax:2.63€
Out of Stock
Stock: Out of Stock
Model: Calcetin-TZ-V6
This silicone sock for the TZ-V6 hotend wraps around the hot section to reduce heat loss, limit the direct effect of part-cooling airflow and help keep the block cleaner. It is a replacement part shaped specifically for the TZ-V6 assembly shown in the photographs.
What it adds to the ho..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Bimetal-M6-D7
Bimetal all-metal heatbreak for dual V6-style hotends, with an M6 × 1 thread for the heater block and a smooth Ø6.95mm upper body for retention in a heatsink designed for nominal Ø7mm heatbreaks.
Its construction combines titanium in the thermal bridge with copper in the cold section. Titanium li..
3.20€
Ex Tax:2.64€
Stock: In Stock
Model: Boquilla-0.6-k1
Brass Nozzle Compatible with Creality K1 / K1 Max and Ender 3 V3 KEThis brass nozzle is an excellent option for users of Creality K1 / K1 Max and Ender 3 V3 KE, and other similar heating blocks. Designed for 1.75 mm filaments with a 0.6 mm diameter, it offers great versatility and precision in print..
1.30€
Ex Tax:1.07€
Stock: In Stock
Model: HGX-Lite
HGX Lite 9.5:1 extruder without motor for 1.75 mm filament
The HGX Lite is a compact geared extruder for 1.75 mm filament, intended for direct-drive configurations where low toolhead mass and firm filament control are important. Its metal body weighs approximately 76 g and combines an advertised ..
28.50€
Ex Tax:23.55€
Stock: In Stock
Model: Metal-Hotend-TZ-X-P
TZ 2.0 all-metal hotend for Bambu Lab X1, X1C, P1P and P1S, designed as an alternative to the original integrated hotend body. Its main service advantage is a threaded replaceable nozzle: if the nozzle becomes worn or damaged, it can be changed without replacing the complete hotend body.
The asse..
14.90€
Ex Tax:12.31€
Stock: In Stock
Model: Nozzle-coated-0.3
V6-style brass nozzle for 1.75 mm filament, with a nominal 0.3 mm outlet and an external non-stick coating. Its smaller outlet is intended for small parts, lettering, fine contours and details that a 0.4 mm nozzle cannot reproduce as easily.
The dark finish covers the outer cone and hex to help r..
2.29€
Ex Tax:1.89€
Stock: In Stock
Model: Nozzle-coated-0.4
V6-style brass nozzle for 1.75 mm filament, with a nominal 0.4 mm outlet and an external non-stick coating. It is a general-purpose size balancing detail, line strength, ease of tuning and print time.
The dark finish covers the outer cone and hex to help reduce plastic buildup and simplify cleani..
2.29€
Ex Tax:1.89€
Stock: In Stock
Model: V6-Heater-Block-PT100
V6-format heater block designed to accommodate temperature sensors with a nominal 3 mm cylindrical encapsulation, including NTC thermistors and RTD sensors such as the PT100. It also firmly secures the heater cartridge, providing stable installation and good thermal contact between the hotend compon..
0.90€
Ex Tax:0.74€
Stock: In Stock
Model: Bimetal-M6-M7
Bimetal all-metal heatbreak for V6-style hotends, with an M6 × 1 thread for the heater block and an M7 × 1 thread for the heatsink. It is designed for 1.75mm filament.
It combines a titanium section that limits heat transfer towards the cold zone with a copper section that conducts residual heat ..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Termistor-104NT-4-XH
Fresa 3D 104NT-4 thermistor with a 145 mm cable and 2-pin XH2.54 connector. It is intended for temperature measurement in hotends and other systems compatible with the 104NT-4 electrical curve.
Features
Sensor type: 104NT-4 NTC thermistor.
Cable length: 145 mm.
Connector: 2-pin XH2.54.
Brand:..
3.35€
Ex Tax:2.77€
Out of Stock
Stock: Out of Stock
Model: Kit-Bloque-Kobra3
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, thermistor, bimetal heatbreak, 0.4 mm Brass nozzle and silicone sock.
It is intended to connect to the original Kobra 3 printhead. It should not be..
12.70€
Ex Tax:10.50€