- Stock: 10
- Model: PLA+ Especiales GST3D
Color range:
PLA
PLA Bright
PLA Fluorescent
PLA Silk
PLA Special Colours
GST3D Marble PLA+ 1.75 mm creates a light finish with small dark speckles that visually resembles stone. The pattern helps disguise layer lines and adds interest to busts, sculptures, planters, vases, bases, architectural models and decorative parts.
The name describes its visual effect: it should not be interpreted as real marble or as a guarantee of the mechanical, thermal or wear properties of stone.
Key features
- Decorative PLA+ with a marble effect.
- Diameter: 1.75 mm.
- Net weight: 1 kg.
- Light base with dark speckles for a stone-like appearance.
- The pattern visually reduces the prominence of layer lines.
- No enclosed chamber required.
- Vacuum-packed spool.
Starting print settings
| Setting | Starting point |
|---|---|
| Nozzle temperature | 180-220°C; start around 200°C |
| Bed temperature | 40-60°C |
| Part cooling | Up to 100% after the first layers |
| Typical nozzle | 0.4 mm or larger |
The spool label takes priority if it specifies a narrower range. Print a temperature tower and test flow before a long job. Available information does not require a special nozzle, but any effect filament may behave somewhat differently from a plain colour; if extrusion becomes uneven, check temperature and flow before increasing retraction.
Making the most of the marble effect
- Curved surfaces and fine layers often display the speckles well.
- Careful seam placement prevents disruption of a main visible face.
- Sanding or post-processing changes the visual distribution of the speckles; test on a sample first.
- Speckle spacing is not a controlled repeating pattern and may vary along the spool.
Compatibility
Compatible with FDM/FFF printers designed for 1.75 mm filament, including common HTA3D HPRO, Creality Ender 3, Prusa MK3/MK4, Bambu Lab A1/P1/X1 and Voron configurations. A PLA/PLA+ profile is required, along with filament-path checks in enclosed or multi-material feeders.
Storage
Keep the spool sealed with desiccant. If the filament crackles, bubbles appear or surface quality changes, dry it before changing the profile.
Other GST3D finishes
For a wide range of plain colours, see standard PLA+. Silk PLA+ adds pearlescent reflections, Bright PLA+ provides intense colours and Fluorescent PLA+ prioritises visibility.
It is for you if
- You want a stone-like appearance without painting the whole part.
- You print busts, sculptures, vases or decorative models.
- You want to make some layer lines less visually prominent.
It is not for you if
- You need real marble or stone-equivalent structural properties.
- You require an exactly repeatable speckle pattern.
- The part will face high temperature or a critical application without testing.
