WINKLE PLA HD Interference 1.75 mm Filament – Metallic Effect and Colour Shift

WINKLE PLA HD Interference 1.75 mm Filament

WINKLE PLA HD filament manufactured in Spain and enriched with metallic-effect particles that change tone depending on the lighting and viewing angle. It provides a distinctive visual finish for figures, decorative parts, models, prototypes and projects where surface appearance matters.

The range includes tones such as Galaxy Blue, Dark Bronze, Emerald Green and Agate Violet, depending on the available options. The effect may look different according to wall orientation, lighting, layer height and the final finish of the part.

Suggested printing parameters

• Diameter: 1.75 mm.
• Nozzle temperature: 190-230 °C.
• Bed temperature: not always required; if used, 50-70 °C.
• Starting nozzle: 0.4 mm.
• Chamber: open.

Start around the middle of the range and tune temperature, cooling, speed and flow for your printer. The bed, Z offset and first layer must be calibrated correctly. As with other filaments containing particles or visual effects, check the nozzle and extrusion if you substantially change the setup.

Presentation and storage

The range is supplied in the presentations available in the product options. Keep the spool sealed and protected from moisture and direct sunlight. If the filament has absorbed moisture, suitable drying may help reduce popping, stringing and irregular extrusion.

It is for you if

You want easy-to-print PLA with a metallic finish and changing tones for decorative parts or visual prototypes.

It is not for you if

It is not the best choice if you need a completely uniform colour, exact colour matching between spools or a technical material with certified mechanical properties for a specific application.