Stock: In Stock
Model: 5015s-12V
5015-format centrifugal blower fan powered from 12 V and supplied with an approximately 1 metre cable. Its side outlet allows air to be directed through a duct, making it suitable for part cooling, compact air channels, electronics and other applications requiring localised airflow.
Specification..
4.00€
Ex Tax:3.31€
Stock: In Stock
Model: Eco Turbo Kit
The BIQU Eco Turbo Kit V1.0 is a remote part-cooling system for 3D printers. It combines a Nidec brushless centrifugal blower with a BIGTREETECH controller board and transports air to the toolhead through a flexible hose.
Moving the blower away from the toolhead can reduce moving mass compared wi..
39.99€
Ex Tax:33.05€
Stock: In Stock
Model: 12032Blower-BallBearing-24V
GDSTIME 12032 24V centrifugal blower fan with dual ball bearings, a 2-pin XH2.54 connector and a 30 cm cable. Its 120 × 120 × 32 mm format provides substantially more airflow than the compact blowers commonly used on print heads.
It is intended for ventilating enclosures, electronics, machines, f..
11.99€
Ex Tax:9.91€
Stock: In Stock
Model: 12032Blower-Sleeve-24V
Large-format GDSTIME centrifugal blower powered from 24 V and measuring a nominal 120 × 120 × 32 mm. Its airflow and pressure make it suitable for ducts, filtration, electronics cooling and larger-scale local ventilation than the blowers normally fitted around hotends.
Specifications
Brand: GD..
9.59€
Ex Tax:7.93€
Stock: In Stock
Model: 4020Blower-24V
GDSTIME 24 V centrifugal blower in a 4020 format, with a sleeve bearing and an approximately 20 cm cable. Its 20 mm thickness provides static pressure in a compact assembly suitable for nozzles, air ducts and localised cooling.
Specifications
Brand: GDSTIME.
Format: 4020.
Nominal dimensions:..
3.50€
Ex Tax:2.89€
Stock: In Stock
Model: 5015s-24v
GDSTIME 5015-format centrifugal blower powered from 24 V and fitted with a hydraulic bearing system. Its side outlet is designed for air ducts and nozzles, providing localised cooling in 3D printers, electronics and compact equipment.
Specifications
Brand: GDSTIME.
Format: 5015.
Nominal dime..
3.15€
Ex Tax:2.60€
Stock: In Stock
Model: 5020Blower-Sleeve-24V-25cm
GDSTIME 5020-format centrifugal blower powered from 24 V and using a sleeve bearing. Its 20 mm thickness provides more airflow than an equivalent 5015 model when the duct, bracket and available space are designed for this format.
Specifications
Brand: GDSTIME.
Format: 5020.
Nominal dimension..
7.65€
Ex Tax:6.32€
Stock: In Stock
Model: 3010Blower-Ballbearing-24V
GDSTIME 3010 24V centrifugal blower fan with dual ball bearings and a 15 cm cable. Its compact 30 × 30 × 10 mm format provides directed airflow in installations where very little space is available.
The dual ball bearing system is particularly suitable for applications involving long operating pe..
6.75€
Ex Tax:5.58€
Stock: In Stock
Model: 4010Blower-BallBearing-12V-20cm
GDSTIME 4010 12V centrifugal blower fan with a ball bearing system and a 20 cm cable. It provides directed airflow through compact cooling ducts used in 3D printers, electronic equipment and small machines.
The ball bearing system is appropriate for frequent or extended operation, particularly wh..
6.65€
Ex Tax:5.50€
Out of Stock
Stock: Out of Stock
Model: 4010Blower-BallBearing-24V-1m
GDSTIME 4010 24V centrifugal blower fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 10 mm format produces concentrated airflow through compact cooling ducts.
The ball bearing system is suitable for equipment subject to frequent or extended operation. The long cable simplif..
6.25€
Ex Tax:5.17€
Stock: In Stock
Model: 4020s-12V
This GDSTIME 4020 centrifugal blower is designed for 12 V systems. Its impeller draws air through the circular inlet and directs it through a lateral outlet, making it suitable for 3D-printer part-cooling ducts, small electronic equipment and projects requiring concentrated airflow.
Unlike an axi..
3.60€
Ex Tax:2.98€
Stock: In Stock
Model: 4020Blower-BallBearing-24V-1m
GDSTIME 4020 24V centrifugal blower fan with a ball bearing system and a 1 metre cable. It retains a nominal width of 40 mm while using a 20 mm thick housing, allowing a larger impeller than a 4010 blower.
It is suitable for directed cooling where a compact fan designed for frequent operation is ..
6.90€
Ex Tax:5.70€