-16 %
Out of Stock
Stock: Out of Stock
Model: Dragon2-HF-Ceramic
The Trianglelab Dragon V2.0 HF with ceramic heatbreak is the high-flow member of the Dragon V2.0 family for 1.75 mm filament. It retains the compact outer envelope of the SF model while extending the melt zone to transfer more energy into the filament when a print demands high volumetric flow.
It..
89.00€ 74.99€
Ex Tax:61.98€
Stock: In Stock
Model: Dragon2-SF-Ceramic
The Trianglelab Dragon V2.0 SF with ceramic heatbreak is a standard-flow hotend for 1.75 mm filament. It combines a compact V6-style interface with a rigid structure joining the heater block to the heatsink, reducing load on the heatbreak and making nozzle maintenance easier.
The SF or Standard F..
82.00€
Ex Tax:67.77€
Recommended
-13 %
Stock: In Stock
Model: Dual-Gears-5mm-ID-endurecida-niquel
Trianglelab dual-drive gear set for 1.75 mm filament extruders. Its two toothed grooves grip the filament from opposite sides and rotate together, providing more consistent feeding and reducing the risk of slipping compared with a single drive gear.
Both gears are made from hardened steel with a ..
14.99€ 12.99€
Ex Tax:10.74€
Stock: In Stock
Model: V6-Titanium-throat-Dual
Trianglelab Kraken all-metal heatbreak manufactured from titanium alloy for 1.75mm filament. It uses a smooth 7mm cold-side body and a hot-side M6 thread, a geometry intended for heatsinks that secure the heatbreak through a cylindrical bore and a separate lateral retention system.Trianglelab declar..
5.99€
Ex Tax:4.95€
Recommended
Stock: In Stock
Model: Throat-AM-Bimetal-M6-D7
Trianglelab all-metal bimetal heatbreak for dual V6-style hotends, with an M6 thread for the heater block and a smooth Ø7mm upper body for retention in a compatible heatsink. It is designed for 1.75mm filament.
It combines a polished stainless-steel centre tube with two copper-alloy sections. Thi..
15.35€
Ex Tax:12.69€
Stock: In Stock
Model: Extender-Melt-zone-HFPlus
The Trianglelab MZE HF Plus is a melt-zone extender for hotends using a V6-style nozzle interface. It fits between the heater block and nozzle, adding approximately 8mm of heated travel to increase the amount of filament that can be melted before flow-related under-extrusion occurs.
The HF Plus v..
9.99€
Ex Tax:8.26€
Stock: In Stock
Model: Rapido-UHF-ACE-PT1000
The Trianglelab Rapido ACE UHF is a 24 V hotend for high-speed 3D printing, combining an extended melt zone, a replaceable ceramic heater and an integrated PT1000 sensor. This product is specifically the UHF PT1000 version; it must not be confused with HF variants or versions fitted with 104NT-4 or ..
117.99€
Ex Tax:97.51€
Stock: In Stock
Model: Rapido-UHF-ACE-104NT-4
Trianglelab RAPIDO ACE hotend in the UHF ultra-high-flow configuration with a 104NT-4 temperature sensor. It combines an extended melting zone with a compact design, replaceable ceramic heater and several mounting options for fast 3D printers.
This product is specifically the UHF version with a 1..
105.99€
Ex Tax:87.60€
Stock: In Stock
Model: Nozzle-T-V6 1.75-0.3
Trianglelab brass nozzle for 1.75 mm filament, with a nominal 0.3 mm outlet and an M6 × 1 V6 interface. This T-V6 version with the family's distinctive external geometry combines the good thermal transfer of brass with manufacturing intended to keep the inner path consistent.
It is intended for f..
2.99€
Ex Tax:2.47€
Recommended
Stock: In Stock
Model: Nozzle-T-V6 1.75-0.4
Trianglelab brass nozzle for 1.75 mm filament, with a nominal 0.4 mm outlet and an M6 × 1 V6 interface. This T-V6 version with the family's distinctive external geometry combines the good thermal transfer of brass with manufacturing intended to keep the inner path consistent.
This is the general-..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: Nozzle-T-V6 1.75-0.5
Trianglelab brass nozzle for 1.75 mm filament, with a nominal 0.5 mm outlet and an M6 × 1 V6 interface. This T-V6 version with the family's distinctive external geometry combines the good thermal transfer of brass with manufacturing intended to keep the inner path consistent.
It increases flow an..
2.99€
Ex Tax:2.47€
Stock: In Stock
Model: TBG-Air-LDO
The Trianglelab TBG-AIR combines a dual-drive extruder, a round LDO motor and a V6-geometry hotend for 1.75 mm filament in one assembly. Its short, constrained path reduces the unsupported section between the drive gears and melt zone, making it particularly interesting for direct drive and flexible..
93.50€
Ex Tax:77.27€