Stock: In Stock
Model: Silicona-18mm
Silicone damping spacer for mounting a heated bed on a 3D printer’s Y carriage. Its semi-rigid body maintains the distance between both components while allowing a limited amount of compression for adjustment.
It may replace conventional springs when a less elastic mounting arrangement with reduc..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: Silicona-Boquilla-A1-Mini
Compatible replacement silicone nozzle wiper for the Bambu Lab A1 Mini. It forms part of the heatbed wiping system and helps remove residue from the hotend tip during automatic preparation before printing.
This is a compatible alternative and not an original Bambu Lab spare part. This listing cov..
1.20€
Ex Tax:0.99€
Stock: In Stock
Model: Silicona-Boquilla-A1
Compatible replacement silicone nozzle wiper for the Bambu Lab A1. This small part is fitted to the wiping support beside the heatbed and contacts the hotend tip during automatic print preparation, helping remove filament residue before bed levelling and the first layer.
This is a compatible alte..
1.25€
Ex Tax:1.03€
Stock: In Stock
Model: Aislante-Silicona-DragonACE
Silicone Sock for Dragon ACE Hotend
Silicone sock designed to cover the heater block of Dragon ACE hotends with the matching geometry. It helps reduce filament residue sticking to the block and limits direct exposure to part-cooling airflow, keeping the hotend area cleaner.
Compatibility depends o..
4.75€
Ex Tax:3.93€
Stock: In Stock
Model: Aislante Silicona Hotend - PT100
Silicone Sock for V6 Heater Block with 3 mm Encapsulated Sensor Opening
Silicone sock for heater blocks with V6-type geometry and an opening for 3 mm encapsulated temperature sensors. It helps keep the block cleaner from filament residue and reduces direct exposure to part-cooling airflow.
It is i..
0.95€
Ex Tax:0.79€
Stock: In Stock
Model: SK10
SK10 aluminium support for securing a 10 mm smooth rod to a base parallel to the shaft. The rod is inserted into the split clamp and secured with a clamping screw.
Nominal SK10 dimensions
Shaft diameter: 10 mm.
Base width: 42 mm.
Depth: 14 mm.
Nominal shaft centre height: 20 mm.
Approximat..
1.25€
Ex Tax:1.03€
Stock: In Stock
Model: SK12
SK12 aluminium end support for securing 12 mm smooth rods to a surface parallel to the shaft. It uses a split clamp and clamping screw to lock the rod in position.
Nominal SK12 dimensions
Shaft diameter: 12 mm.
Base width: 42 mm.
Depth: 14 mm.
Nominal shaft centre height: 23 mm.
Approximat..
1.80€
Ex Tax:1.49€
Stock: In Stock
Model: SK8
SK8 aluminium end support for securing an 8 mm smooth rod or linear shaft to a surface parallel to the shaft direction. Its split clamp locks the shaft with a clamping screw without requiring machined shaft ends.
Nominal SK8 dimensions
Shaft diameter: 8 mm.
Base width: 42 mm.
Depth: 14 mm.
..
1.20€
Ex Tax:0.99€
Out of Stock
Stock: Out of Stock
Model: SKR 2
Features:Poweful main control chip:ARM Cortex-M4 STM32F429VGT6 main control chip with a core frequency up to 180 MHz.Compatible with Marlin, Klipper and RepRapFirmwareAdded safety design: Advanced thermistor protection circuit.Thermal runaway circuit protection added.Marlin integrate anti-reverse st..
70.99€
Ex Tax:58.67€
Only a few units in stock
-35 %
Stock: In Stock
Model: SMARTFIL FLEX 1.75mm
Thermoplastic elastomerA material that has the ability to be stretched to moderate elongations and, after removal of the stress, return to its original shape. It has the potential to be recyclable as it can be molded and reused as plastic.FLEXIt is a specially additivated filament that allows the pr..
18.00€ 11.75€
Ex Tax:9.71€
Only a few units in stock
Clearance
-57 %
Stock: In Stock
Model: SMARTFIL PLA 3D870 1.75mm
FEATURES: Biodegradable PLA filament with excellent mechanical properties and great quality in 3D printing. Ideal for those who start printing due to its great ease of printing. No warpingPLA filament composed of Polylactic Acid or Polylactide. Biodegradable plastic due to its natural origin (c..
29.95€ 13.00€
Ex Tax:10.74€
Only a few units in stock
-20 %
Stock: In Stock
Model: SMARTFIL PLA Antibacterial 1.75mm
ANTIBACTERIALSmartfil ANTIBACTERIAL is a filament manufactured with PLA and silver nanoparticles that provide antibacterial properties to the material, preventing the growth of rust, fungus and all bacteria that causes bad smells, discoloration, stains, deterioration and corrosion on the printed pie..
35.50€ 28.50€
Ex Tax:23.55€