Only a few units in stock
Clearance
-30 %
Stock: In Stock
Model: SMARTFIL PVA 1.75mm
PVA or polyvinyl alcohol is a water-soluble filament used as support material in 3D printing.It is especially recommended to use for PLA pieces to reach those points where the support structure is complex or inaccessible.Later, it can be removed by putting the piece in water
It is also a biodeg..
28.45€ 19.99€
Ex Tax:16.52€
-21 %
Stock: In Stock
Model: Relé-10A
SSR-40DA solid-state relay for controlling an AC load from a 3 to 32 V DC signal. The unit is marked for a 24 to 380 V AC output and a nominal current of 40 A.
Confirmed unit data
TypeSSR-40DA: DC control and AC load
Control input3–32 V DC
Output24–380..
10.75€ 8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Pinza-abrazadera
Stainless steel spring clip designed to secure a removable glass, mirror or other rigid build surface to a 3D printer heated bed.
Its narrow design occupies little space around the edge of the build surface and can be fitted or removed without screws. Clamping pressure is provided by the elastici..
0.75€
Ex Tax:0.62€
Stock: In Stock
Model: Nut-T8x2-Copper
T8×2 trapezoidal flange nut manufactured from a brass-type alloy, designed to convert the rotation of an 8 mm lead screw into linear motion. Its 2 mm lead provides fine travel for Z axes, actuators and small CNC machines.
Specifications
Thread type: T8×2.
Nominal diameter: 8 mm.
Lead: 2 mm p..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Spring-Nut-T8x2-Copper
T8×2 brass-type spring-loaded anti-backlash nut designed to reduce part of the axial clearance in linear motion systems using an 8 mm trapezoidal lead screw with 2 mm travel per revolution.
The assembly uses two threaded elements working against opposite thread flanks. It may improve behaviour du..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Nut-POM-T8x2
T8×2 trapezoidal POM nut for linear motion systems using an 8 mm lead screw. Its 2 mm travel per revolution and the material's low friction make it suitable for Z axes, actuators and mechanisms requiring fine movement.
Features
T8×2 trapezoidal thread.
Nominal diameter: 8 mm.
Lead: 2 mm per ..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: Nut-T8x8-Copper
This T8×8 trapezoidal flange nut is manufactured from a brass-type copper alloy and converts the rotation of an 8 mm lead screw into linear movement. It is commonly used on the Z axes of 3D printers, small CNC machines, lifting mechanisms and automation projects.
The T8×8 designation indicates a ..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Spring-Nut-T8x8-Copper
T8×8 brass-type anti-backlash nut comprising two threaded elements and a preload spring. It is designed for 8 mm trapezoidal lead screws and helps reduce part of the axial clearance between the nut and thread.
The spring keeps both threaded sections against opposite thread flanks. This arrangemen..
1.75€
Ex Tax:1.45€
Stock: In Stock
Model: Nut-POM-T8x8
T8×8 trapezoidal POM nut designed to convert the rotation of an 8 mm lead screw into linear movement. Its four-hole flange allows mounting on Z axes, actuators, 3D printers and small CNC machines designed for this geometry.
POM offers low friction and behaves differently from a brass nut. It may ..
0.80€
Ex Tax:0.66€
Stock: In Stock
Model: IR-Module
This TCRT5000 infrared reflective sensor module detects nearby surfaces, objects and contrast changes through a digital output. It is suitable for line-following projects, reflective-mark detection, optical counters, small automation systems and electronic prototypes.
The TCRT5000 combines an inf..
0.60€
Ex Tax:0.50€
Stock: In Stock
Model: Cristal bor- 3mm 213x200
213 × 200 × 3 mm tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an even first l..
4.25€
Ex Tax:3.51€
Stock: In Stock
Model: Cristal bor- 3mm 214x214
214 × 214 × 3 mm tempered borosilicate glass plate for use as a rigid print surface over an FDM/FFF 3D printer bed. Its lower thermal expansion compared with conventional glass helps maintain a stable surface through repeated heating and cooling cycles.
The smooth face can produce an even first l..
6.25€
Ex Tax:5.17€