Stock: In Stock
Model: Fusible-1808FastBlow
1808-size fast-acting surface-mount fuse, available in 10 A, 15 A and 20 A versions. It can be used to repair boards and circuits requiring the same package, current rating and operating characteristic.
The 10 A and 15 A versions can replace the corresponding fuses on the BIGTREETECH SKR 2. Selec..
0.55€
Ex Tax:0.45€
New
Stock: In Stock
Model: 24-12/5V-module
12/24 V to 5 V DC-DC step-down converter for creating a 5 V auxiliary rail from the main power supply of a 3D printer, CNC machine or electronics project. It can power a Raspberry Pi used with Klipper, displays, LED lighting, controllers and other 5 V devices without adding a second mains-powered su..
7.50€
Ex Tax:6.20€
Stock: In Stock
Model: ADXL345 V2.0
The BIGTREETECH ADXL345 V2.0 is a USB accelerometer designed to measure a 3D printer's resonances and help calibrate Input Shaper in Klipper. It combines an ADXL345 sensor with its own RP2040 microcontroller, allowing it to connect to the Klipper host over USB-C without routing SPI signals to the ma..
11.35€
Ex Tax:9.38€
Only a few units in stock
-18 %
Stock: In Stock
Model: BTT-CB1
The BIGTREETECH CB1 V2.2 with 1 GB RAM is a compact computer module designed to run Linux and act as a host for Klipper, Moonraker and Mainsail on compatible carrier boards. It combines a quad-core 1.5 GHz Allwinner H616 Cortex-A53 processor with 2.4 GHz Wi-Fi and provides the signals required for a..
36.75€ 29.99€
Ex Tax:24.79€
Stock: In Stock
Model: DCDC5V-Module
The BIGTREETECH DCDC MODE V1.0 is a DC-DC step-down module designed to provide a stable 5 V output at up to 3 A for peripherals connected to SKR V1.4 and SKR V1.4 Turbo control boards.
It converts the printer's main 12 or 24 V supply and reduces the load placed on the control board's integrated 5..
5.75€
Ex Tax:4.75€
Stock: In Stock
Model: E3-RRF
The BIGTREETECH E3 RRF V1.1 is a 32-bit controller board designed to upgrade Ender-3-family printers and machines using a compatible electronics footprint. It combines a 168 MHz STM32F407VGT6, four integrated UART TMC2209 drivers and an onboard ESP8266 Wi-Fi module.
It can run Marlin or RepRapFirmw..
69.99€
Ex Tax:57.84€
Stock: In Stock
Model: EBB36 CAN Max31865
The BIGTREETECH EBB36 CAN V1.2 is a printhead toolboard designed around 36 mm extruder stepper motors. It centralises the motor, heater, fan and sensor connections on the toolhead, reducing the number of wires running through the printer.
This version includes a MAX31865 interface for 2-wire or 4..
21.25€
Ex Tax:17.56€
New
Stock: In Stock
Model: EBB36 GEN 2
The BIGTREETECH EBB36 GEN2 V1.0 is a new-generation toolboard for compact toolheads using 36 mm extruder stepper motors. It centralises the motor, heater, fan, probe and sensor connections through a single CAN BUS or USB communication link.
The GEN2 revision features a 64 MHz STM32G0B1 microcontr..
35.75€
Ex Tax:29.55€
Stock: In Stock
Model: EBB42 CAN Max31865
The BIGTREETECH EBB42 CAN V1.2 is a toolboard designed for installation around 42 mm extruder stepper motors. It centralises the motor, heater, fan and sensor connections on the toolhead and communicates with Klipper through CAN BUS or USB.
This version includes a MAX31865 interface and supports ..
21.25€
Ex Tax:17.56€
Stock: In Stock
Model: EBB42 CAN No Max31865
The BIGTREETECH EBB42 CAN V1.2 is a printhead toolboard designed for installation around 42 mm extruder stepper motors. It moves the extruder, heater, fan and sensor connections to the toolhead and communicates with Klipper through CAN BUS or USB.
This version does not include a MAX31865 interfac..
15.99€
Ex Tax:13.21€
New
Stock: In Stock
Model: EBB42 GEN 2
The BIGTREETECH EBB42 GEN2 V1.0 is a new-generation toolboard designed for installation around 42 mm extruder stepper motors. It centralises the motor, heater, fan, sensor and probe connections on the toolhead and communicates with Klipper through CAN BUS or USB.
It features a 64 MHz STM32G0B1 mi..
35.75€
Ex Tax:29.55€
Stock: In Stock
Model: Hermit-crab-V2
The BIGTREETECH Hermit Crab V2.0 CAN is a manual quick-change platform designed to keep several toolheads prepared and swap them without dismantling every carriage component. It includes one electronic fixed plate and three removable tool plates for compatible hotends, extruders, probes or other too..
158.50€
Ex Tax:130.99€