Out of Stock
Stock: Out of Stock
Model: 30A mosfet-module
The BIQU116-A2 is an external MOSFET module used to switch a 12 or 24V DC heated bed or another resistive load from a controller board's heater output. The electronics retain temperature regulation while the module switches current supplied directly by the power supply.
Its large heatsink, separa..
13.95€
Ex Tax:11.53€
Out of Stock
Stock: Out of Stock
Model: SBCAN-Fysetc
The FYSETC SB CAN ToolHead V1.3 brings the StealthBurner printhead electronics together on one board. It controls the extruder motor through an integrated TMC2209 driver, the heater and temperature sensor, two fans, RGB lighting, and inputs for a probe or endstop. An onboard ADXL345 supports Klipper..
34.50€
Ex Tax:28.51€
Out of Stock
Stock: Out of Stock
Model: UCAN-Fysetc
The FYSETC UCAN V1.0 connects a host computer over USB-C to a CAN bus used by compatible toolhead boards and other modules. It is based on an STM32F072 and has a pluggable terminal for CAN_H, CAN_L and GND. In a Klipper installation, it provides host communication with CAN nodes; it does not replace..
13.25€
Ex Tax:10.95€
Out of Stock
Stock: Out of Stock
Model: mosfet-module
This IRF520 MOSFET module can control DC loads using a signal from an Arduino, ESP32, Raspberry Pi, controller board or other microcontroller. It can be used to switch or regulate devices such as fans, LED lighting, small pumps and other low-voltage accessories using PWM.
The module simplifies MO..
1.75€
Ex Tax:1.45€
Out of Stock
Stock: Out of Stock
Model: Gen_L
Makerbase MKS Gen_L V2.1 is an 8-bit FDM 3D-printer controller combining Arduino Mega 2560/RAMPS-style architecture on one PCB. It provides five X, Y, Z, E0 and E1 driver sockets, USB, endstop and temperature-sensor inputs, outputs for a bed, two hotends and a fan, and display connectors. The PCB si..
24.00€
Ex Tax:19.83€
Out of Stock
Stock: Out of Stock
Model: DLC32
MKS DLC32 is a 32-bit ESP32 controller for building or upgrading GRBL-compatible diode laser engravers and small CNC machines. It combines USB, Wi-Fi and web control, offline operation from a microSD card, three stepper-driver channels and dedicated TTL/PWM laser and DC spindle outputs.
It suits ..
19.99€
Ex Tax:16.52€
Out of Stock
Stock: Out of Stock
Model: Robin-Nano
The MKS Robin Nano V3.1 is a 32-bit control board for building or upgrading a 3D printer's electronics. This revision uses an STM32F407VET6 at 168 MHz, with 512 KB flash and 192 KB RAM, and accepts replaceable stepper drivers. It offers connections for two extruders, a heated bed, display, fans and ..
41.75€
Ex Tax:34.50€
Out of Stock
Stock: Out of Stock
Model: RAMPS1.6
The RAMPS 1.6 is an Arduino Mega 2560 expansion shield for RepRap projects and repairs to printers built around this architecture. It brings together connections for motors, endstops, thermistors, a heated bed, hotend and fan, with replaceable stepper drivers. It retains the modular approach of earl..
9.99€
Ex Tax:8.26€
Out of Stock
Stock: Out of Stock
Model: Raspberry Pi 4 1GB
Raspberry Pi 4 Model B with 1GB LPDDR4 memory, a compact single-board computer for automation, learning, lightweight servers, electronics projects and as a Linux host for a Klipper-powered 3D printer. It combines a 64-bit quad-core Broadcom BCM2711 processor with dual-band wireless networking, Bluet..
56.99€
Ex Tax:47.10€
Stock: In Stock
Model: Mosfet25A-Modulo
V1.3 external MOSFET module designed to switch a 12 or 24V DC heated bed or another resistive load from a controller board's heater output. The control input is separate from the power terminals and the power transistor has its own heatsink.
It is particularly useful where heated-bed current shou..
2.99€
Ex Tax:2.47€