Stock: In Stock
Model: Tuerca ranura 30-M4
Description
Nickel-plated carbon-steel M4 sliding nut for HTA3D European 30-series profiles. It is inserted through the profile end and provides an adjustable mounting point inside the slot.
Key features
Family: European 30-series profile.
Nominal slot: 8 mm.
Thread: M4.
Material: nickel-p..
0.15€
Ex Tax:0.12€
Out of Stock
Stock: Out of Stock
Model: Tuerca ranura 15-M4
Description
Aluminium M4 sliding nut for HTA3D 15-series structural profiles. It is inserted through an open end and moved longitudinally along the slot to the required mounting position.
The M4 thread can be used to secure brackets, plates, supports and other components using this fastener size.
..
0.16€
Ex Tax:0.13€
Stock: In Stock
Model: T 20-M5
M5 hammer T-nut for fastening brackets, mounts and other accessories to 20 series aluminium profiles with a 6 mm slot. It can be inserted directly through the open slot, allowing components to be added to an assembled frame without accessing the ends of the profile.
Once inside the slot, the nut is..
0.08€
Ex Tax:0.06€
Stock: In Stock
Model: T 30-M5
M5 hammer T-nut for fastening brackets, mounts and accessories to 30 series aluminium profiles with an 8 mm slot. It can be inserted directly through the open slot, allowing components to be added or repositioned without dismantling the ends of the frame.
Once inserted, the nut is turned approximat..
0.08€
Ex Tax:0.07€
Stock: In Stock
Model: Tuerca ranura 20-M5
Description
Nickel-plated carbon-steel M5 sliding nut for HTA3D European 20-series profiles with a nominal 6 mm slot. It is inserted through an open end and can be adjusted longitudinally before tightening the joint.
The M5 thread is commonly used by structural brackets and connectors for 2020 and..
0.12€
Ex Tax:0.10€
Stock: In Stock
Model: Tuerca ranura 30-M5
Description
Nickel-plated carbon-steel M5 sliding nut for HTA3D European 30-series profiles. It can be used to secure brackets, plates, supports and other accessories on structures built from 3030 or 3060 profiles.
Key features
Family: European 30-series profile.
Nominal slot: 8 mm.
Thread:..
0.15€
Ex Tax:0.12€
Out of Stock
Stock: Out of Stock
Model: Tuerca ranura 15-M5
Description
Aluminium M5 sliding nut for HTA3D 15-series structural profiles. It is inserted through an open end of the profile and allows components to be secured at any accessible position along the slot.
The M5 thread is suitable for 15-series accessories specifically designed for this fastener..
0.16€
Ex Tax:0.13€
Stock: In Stock
Model: T-bolt-5x12-20
M5x12 T-bolt for fastening components to 20 series aluminium profiles with a 6 mm slot. The head can be inserted directly through the open slot and turned approximately 90° so that it sits across the inside of the profile.
Unlike a profile nut, this fastening system leaves the threaded section of t..
0.10€
Ex Tax:0.08€
Stock: In Stock
Model: T-bolt-5x16-20
M5x16 T-bolt for fastening components to 20 series aluminium profiles with a 6 mm slot. It can be inserted through the open slot and turned approximately 90° to position its head across the inside of the profile.
The threaded section faces outwards and allows brackets, plates and supports to be sec..
0.11€
Ex Tax:0.09€
Stock: In Stock
Model: Tuerca ranura 30-M6
Description
Nickel-plated carbon-steel M6 sliding nut for HTA3D European 30-series profiles. It is intended for brackets, plates and structural joints using M6 fasteners.
It is inserted through an open end of the profile and can be moved along the slot before final tightening.
Key features
F..
0.19€
Ex Tax:0.16€
Stock: In Stock
Model: T-bolt-6x12-30
M6x12 T-bolt for fastening components to 30 series aluminium profiles with an 8 mm slot. The head is inserted directly through the open slot and turned approximately 90° to position it across the inside of the profile.
The M6 threaded section faces outwards, allowing brackets, plates, supports and ..
0.10€
Ex Tax:0.08€
Stock: In Stock
Model: T-bolt-6x16-30
M6x16 T-bolt for fastening components to 30 series aluminium profiles with an 8 mm slot. It can be inserted directly through the open slot and turned approximately 90° to position its head across the inside of the profile.
Its M6 threaded section faces outwards, allowing brackets, plates and suppor..
0.10€
Ex Tax:0.08€