Filament

Pla Ingeo 3D700 is specially manufactured to offer low thermal shrinkage, around 0.25%, about 4 to 5 times lower than conventional PLA, this implies the following advantages:Better results in large format 3D printers.Superior dimensional accuracy.Print finish with fewer artifacts produced by materia..

PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Raw Material: IngeoTM NatureWorks PLA 3D850* Extrusion temperature of about 180 °C - 210 °C Recommended temperature hot bed 0 - 60ªC (*: NatureWorks an..

PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Raw Material: IngeoTM NatureWorks PLA 3D850* Extrusion temperature of about 180 °C - 210 °C Recommended temperature hot bed 0 - 60ªC (*: NatureWorks an..

The new GLASS family is characterized by its translucent colors. Unlike general-purpose PLA, PLA 850 has higher crystallization speed, temperature resistance and mechanical properties. Thanks to its good adhesion to the bed and its reduced shrinkage capacity, it allows to obtain parts with exce..

The Sakata MAGIC+ range has a greater amount of glitter, so the effect is much more pronounced than the normal magic colors, with this extra shine your pieces will not go unnoticed.PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D ..

WINKLE PLA TOUGH filament (1.75mm) is a filament manufactured in Spain for 3D printers with FFF/FDM technology. PLA is a biodegradable plastic that is obtained from natural resources from starch extracted from corn, beets and wheat.TOUGH PLA is an advanced material designed to obtain high impact res..

Winkle's PLA-WOOD filament (1.75mm) is a filament made in Spain for 3D printers with FFF/FDM technology. PLA is a biodegradable plastic that is obtained from natural resources from the starch extracted from corn, beets and wheat.PLA-WOOD is a PLA-based filament with a load of 40% wood fibers, made u..

Filament with luminescent properties, it is able to absorb light and emit it when it is in the dark. Diameter: 1,75 mm Packaging:Coil vacuum packed with desiccant..

PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Extrusion temperature: 195 °C - 205 °C Recommended temperature heated bed: 40ªC (optional)Features:Sakata 3D Filaments PLA-M filament has been specifically formu..

The PP-GF filament has been developed in collaboration with the multinational Repsol. This union has improved the strength and durability characteristics of this material, making it an ideal choice for applications that require a high level of mechanical strength.    Polypropylene fil..

Sakata 3D Filaments' RE- filaments are made from materials recovered in the filament manufacturing process. They exhibit mechanical and thermal properties similar to filaments made from virgin raw materials. Their color varies according to the manufacturing batch. They are environmentally sustainabl..

These new materials are manufactured through the recovery of production material, therefore we ensure rigorous quality and characteristics. Each production batch has its own uniform and peculiar tone derived from the mixture of filaments of various colours, which makes it ideal for prototypes, model..