GDSTIME 4010 24V Ball Bearing Blower Fan with 1 m Cable

GDSTIME 4010 24V centrifugal blower fan with a ball bearing system and a 1 metre power cable. Its 40 × 40 × 10 mm format produces concentrated airflow through compact cooling ducts.

The ball bearing system is suitable for equipment subject to frequent or extended operation. The long cable simplifies installation in 3D printers and machines where the controller is located away from the print head or cooling point.

Key features

• Brand: GDSTIME.
• Type: centrifugal blower fan.
• Nominal dimensions: 40 × 40 × 10 mm.
• Rated voltage: 24V DC.
• Rated current: 0.08A ±10%.
• Rated speed: 9500 RPM.
• Rated airflow: 3.62 CFM.
• Rated noise level: 30 dBA.
• Ball bearing system.
• Two-wire connection.
• Approximate cable length: 1 m.
• Approximate weight: 15 g.

Applications

• Part cooling in 3D printers.
• Compact ducts for hotends and print heads.
• Localised electronics cooling.
• CNC, robotics and automation projects.

Compatibility

It can replace another 4010 centrifugal fan when the 24V supply, mounting arrangement, outlet orientation and available space all match. Connector type and polarity must also be checked before direct replacement.

Matching nominal dimensions do not necessarily guarantee compatibility with every printed duct, as the casing, mounting holes or exact outlet position may differ.

For 12V machines, see the GDSTIME 4010 12V ball bearing version. Where a 20 mm thick fan can be fitted, consider the GDSTIME 4020 24V centrifugal blower fan.

Installation and control

Connect the fan only to a 24V supply and observe the correct polarity. The selected output must support the fan's operating and starting current.

The fan may be controlled through a PWM-compatible powered fan output, but reliable starting should be checked at the configured minimum setting. An excessively low duty cycle may prevent the rotor from starting even if it runs correctly at higher power.

Package contents

• 1 × GDSTIME 4010 24V centrifugal blower fan with 1 m cable.