- Stock: 999
- Model: PrintedParts-Voron0.2
Model:
VORON 0.1
VORON 0.2
VORON Trident
VORON Trident r1
VORON 2.4 r1
VORON 2.4 r2
Stealthburner Beta Extruder
ABS printed parts kit for Voron V0.2, manufactured by HTA3D after the order is placed. The base set covers the frame, motion system and Z axis; selectors can add Mini Stealthburner or Bowden parts, a hotend mount, skirts, electronics mounts, LCD parts, panel mounts, top hat and printed tools.
This item is for V0.2. It is not the historic V0.1 kit and must not be assumed to be V0.2r1 without checking the files. V0.2r1 changed the skirts, feet, filament-sensor option, Mini Stealthburner, top hat and Z mount; we can prepare it as a custom order.
Product scope
This is a printed-parts product. Extrusions, rails, bearings, belts, pulleys, fasteners, panels, motors, electronics, wiring, hotend and extruder are excluded unless an option explicitly says otherwise. Selecting a hotend adds its printed mount, not the hotend itself.
| Feature | Detail |
|---|---|
| Revision | Voron V0.2 |
| Material | ABS |
| Main colour | Black |
| Accent colour | Red, black, grey, blue, yellow, green or silver |
| Production | Made to order; lead time varies with the queue |
Base kit contents
[a] marks the accent-colour parts. The list has been corrected against the official V0.2 branch.
| Group | Parts |
|---|---|
| Accent | [a] 9 mm Spacer ×6; A Drive Tensioner ×1; B Drive Tensioner ×1; Cable Tie ×1; Idler Cam Lock ×2; Railstop ×5; Tensioner Knob ×2; Thumb Nut ×3; Z Endstop Mount ×1; Z Motor Mount ×1. |
| XY motion | A/B Drive Frame Lower and Upper ×1 each; A/B Idler Lower and Upper ×1 each; XY Joint Left Lower/Upper ×1 each; XY Joint Right Lower/Upper ×1 each; X Carriage ×1. |
| Bed and Z axis | Front Bed Mount ×1; Rear Bed Mount Left ×1; Rear Bed Mount Right ×1; T8 Nut Block ×1. |
| Electronics and frame | Drag Chain Spacer ×1; M2 Nut Adapter Rotated ×5; PSU Cover ×1; Spool Holder V0 ×1. |
Extruder and hotend
- Mini Stealthburner: guidler, latch, cowling, midbody, motor plate, shuttle, strain-relief body and spacers.
- Bowden: body for an ECAS04 collet or M10 fitting plus the corresponding front insert.
- Hotend mount: printed for the selected Dragon, Dragonfly BMO, Revo Voron, Micro Swiss All Metal, DropEffect XG or Spider Pro.
The hotend model and revision must match the selected mount. The option supplies printed parts, not the hotend, heater, sensor, fans, BMG gears or motor.
Additional options
| Option | Adds | Required check |
|---|---|---|
| Skirts | V0.2 feet, accents, inserts and front, side and rear skirts. | Do not replace with V0.2r1 parts without checking height, Z motor and bottom panel. |
| Electronics | Printed mounts selected for the declared controller and computer. | State exact models; the repository contains alternatives, not one universal set. |
| LCD | Faceplate, diffuser, knob and left/right mounts. | Confirm display and revision. |
| Panels | Handle, latches, hinges and clips for the agreed system. | Panels are excluded; ask about VHB or modded variants. |
| Printed top hat | Printed sections and clips. | Alternative to the extrusion top hat; both are not normally required. |
| Extrusion top hat | Hinges and clips for the extrusion-based design. | Extrusions and panels are excluded. |
| Tools | BMG Shaft Mod Spacer, two MGN7 guides, Pulley Jig V0.2, T-Nut Mod Tool and drilling guide. | Assembly aids, not permanent machine components. |
Manufacturing parameters
The ABS parts are made using the official guidance as a reference: 0.2 mm layer height, 0.4 mm extrusion width, 40% infill, 4 walls, 5 top and bottom layers and no supports. The BOM and STLs for the exact configuration are always the final reference.
V0.2 versus V0.2r1
V0.2r1 is not merely a marketing label. It introduces taller feet and skirts, Mini Stealthburner changes, a reinforced Z mount, filament-sensor options and top-hat changes, among other differences. If your documents specify V0.2r1, request that revision rather than assuming this V0.2 set is equivalent.
Files can be checked in the official Voron V0.2 GitHub branch.
Custom kits
We can prepare other revisions, mods or specific combinations. Contact info@hta3d.com and state the exact revision, STL link or commit, extruder, hotend, electronics, display, panels, top hat and colours. We will review the files before quoting so that the resulting set is coherent.
This is for you if
- Your project is documented as Voron V0.2.
- You want a configurable ABS kit with Mini Stealthburner or Bowden parts.
- You want to select only the printed groups required by your build.
This is not for you if
- Your project is V0.1 or V0.2r1 and you have not checked the differences.
- You expect a physical hotend, extruder, electronics, extrusions or panels.
- You use mods whose file version cannot be identified.
Made to order: lead time depends on the printing queue. If you have a deadline, contact us before purchasing.
