Stock: In Stock
Model: GT2-POWGE-belt-10mm
POWGE 10 mm GT2 timing belt, made from nylon-covered neoprene and internally reinforced with fiberglass cords.
It is intended for wide GT2 transmissions in CNC machines, large-format 3D printers, modified CoreXY mechanisms and automation projects specifically designed around a 10 mm belt.
Feat..
4.20€
Ex Tax:3.47€
Stock: In Stock
Model: GT2-188-GT2
POWGE 188-2GT closed-loop timing belt, with a 188 mm pitch length, 94 teeth and a width of 6 mm. It is manufactured from nylon-covered neoprene and internally reinforced with fiberglass cords.
As this is a fixed-length closed belt, it is intended for mechanisms specifically designed around this s..
1.25€
Ex Tax:1.03€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-belt-6mm
POWGE 6 mm GT2 timing belt, made from nylon-covered neoprene and internally reinforced with fiberglass cords.
It is designed for synchronous transmissions and positioning systems in 3D printers, light-duty CNC machines, laser cutters and automation mechanisms using a 2 mm-pitch GT2 profile.
Fe..
1.99€
Ex Tax:1.64€
Stock: In Stock
Model: GT2-POWGE-belt-9mm
POWGE 9 mm GT2 timing belt, made from nylon-covered neoprene and reinforced with internal fiberglass cords.
The 9 mm width is intended for transmissions requiring a larger engagement area than a conventional 6 mm belt, provided that the pulleys, tensioners and clamps have been designed for it.
..
4.20€
Ex Tax:3.47€
Stock: In Stock
Model: POWGE-GT2-16Z-10mm
POWGE GT2 16-tooth drive pulley for 10 mm belts, made of aluminium alloy and designed to be secured to a 5 mm shaft.
It combines a wider belt with a compact 16-tooth format. It can be used in large-format 3D printers, CNC machines and custom transmissions requiring a wider belt.
Features
..
2.50€
Ex Tax:2.07€
Stock: In Stock
Model: POWGE-GT2-16Z
POWGE GT2 16-tooth drive pulley for 6 mm belts, made of aluminium alloy and designed to be secured to a 5 mm shaft.
The pulley is locked to the shaft and directly transfers motor movement to the belt. Its 16-tooth format provides a compact transmission and greater linear resolution than a 20-toot..
1.59€
Ex Tax:1.31€
Stock: In Stock
Model: POWGE-GT2-20Z-10mm
POWGE GT2 20-tooth drive pulley for 10 mm belts, made of 6061 aluminium and designed to be secured to a 5 mm shaft with two M4 grub screws.
It is intended for wide-belt GT2 transmissions in large-format 3D printers, CNC machines and custom mechanisms.
Features and dimensions
Brand: POWG..
3.05€
Ex Tax:2.52€
Stock: In Stock
Model: POWGE-GT2-20Z-6mm
POWGE GT2 20-tooth drive pulley for 6 mm belts, made of 6061 aluminium and designed to be secured to a 5 mm shaft with two M4 grub screws.
Its 20T format provides a theoretical travel of 40 mm for each complete motor revolution when used with a 2 mm-pitch GT2 belt.
Features and dimensions
..
1.95€
Ex Tax:1.61€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-20T-10mm-di5
POWGE GT2 20-tooth idler pulley with an integrated bearing and side flanges. It is designed to guide or tension 10 mm GT2 belts when the toothed side of the belt runs against the pulley.
It is suitable for motion systems requiring a wider belt than the common 6 mm format, including certain CNC ma..
3.55€
Ex Tax:2.93€
Stock: In Stock
Model: POWGE-GT2-20T-6mm-di3
POWGE GT2 20-tooth idler pulley with an integrated bearing, intended for 6 mm belts and brackets using a nominal 3 mm axle or screw.
It is designed to guide or tension the toothed side of the belt in 3D printers, CNC machines and other GT2 mechanisms specifying a 20T idler with an M3 mounting.
..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-20T-6mm-di5
POWGE GT2 20-tooth idler pulley with an integrated bearing, designed for 6 mm belts and mounting on a nominal 5 mm axle or screw.
Its 20-tooth profile, side flanges and integrated bearing make it suitable for tensioners and guides contacting the toothed side of the belt in 3D printers, CNC machin..
3.55€
Ex Tax:2.93€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-80Z-6mm
POWGE GT2 80-tooth pulley for 6 mm belts, made of aluminium alloy and catalogued with a 5 mm bore.
Its large diameter makes it primarily suitable as a driven pulley in belt reductions, rotary axes, CNC mechanisms and systems requiring increased output resolution or torque.
Verified features
..
9.79€
Ex Tax:8.09€