Out of Stock
Stock: Out of Stock
Model: Gen_L
Makerbase MKS Gen_L V2.1 is an 8-bit FDM 3D-printer controller combining Arduino Mega 2560/RAMPS-style architecture on one PCB. It provides five X, Y, Z, E0 and E1 driver sockets, USB, endstop and temperature-sensor inputs, outputs for a bed, two hotends and a fan, and display connectors. The PCB si..
24.00€
Ex Tax:19.83€
Out of Stock
Stock: Out of Stock
Model: FC Con Rueda 1m de cable
The mechanical endstop is a sensor designed to detect the position or limit of movement of a mobile component in various devices and machines. This model includes a 1m cable and a 3-pin connector, making installation and connection easy.Mechanical endstops are commonly used in 3D printers, CNC machi..
1.39€
Ex Tax:1.15€
Out of Stock
Stock: Out of Stock
Model: Metal-Hotend-A1
Metal Hotend Kit, Compatible with Bambu Lab A1 Mini.Features:High-Quality Material: The integrated hotend kit is made of hardened steel with a 0.4mm nozzle, specifically designed for the Bambu Lab A1 Mini 3D printer. It offers high temperature resistance and durability.Improved Print Quality: The ho..
15.25€
Ex Tax:12.60€
Out of Stock
Stock: Out of Stock
Model: MGN12C
Compact MGN12C linear carriage for MGN12 rail, with recirculating balls and four top threads for attaching a moving plate, tool or platform. Its short body enables linear axes with a reduced footprint.
It belongs to the same linear-guide family used in our HPRO printers. It is suitable for 3D pri..
7.77€
Ex Tax:6.42€
Out of Stock
Stock: Out of Stock
Model: DLC32
MKS DLC32 is a 32-bit ESP32 controller for building or upgrading GRBL-compatible diode laser engravers and small CNC machines. It combines USB, Wi-Fi and web control, offline operation from a microSD card, three stepper-driver channels and dedicated TTL/PWM laser and DC spindle outputs.
It suits ..
19.99€
Ex Tax:16.52€
Out of Stock
Stock: Out of Stock
Model: Robin-Nano
The MKS Robin Nano V3.1 is a 32-bit control board for building or upgrading a 3D printer's electronics. This revision uses an STM32F407VET6 at 168 MHz, with 512 KB flash and 192 KB RAM, and accepts replaceable stepper drivers. It offers connections for two extruders, a heated bed, display, fans and ..
41.75€
Ex Tax:34.50€
Out of Stock
Stock: Out of Stock
Model: 17HS3401
The 17HS3401 is a compact NEMA 17 stepper motor with a 34 mm body, 5 mm D-shaped shaft and 1.8° step angle. Its rated minimum holding torque is 28 N·cm. It can suit light or space-constrained mechanisms, including small belt axes, plotters, laser engravers and some moving extruders, provided the ava..
8.25€
Ex Tax:6.82€
Out of Stock
Stock: Out of Stock
Model: 17HS4401S-PG518
The 17HS4401S-PG518 combines a 1.8° bipolar NEMA 17 stepper motor with a single-stage planetary gearbox whose exact ratio is 57:11, or approximately 5.18:1. It is intended for mechanisms requiring more low-speed torque and resolution than a direct-drive NEMA 17.
The reduction converts the motor's..
34.99€
Ex Tax:28.92€
Out of Stock
Stock: Out of Stock
Model: Rueda-Vslot-625zz
Motion wheel for compatible V-Slot guiding systems, manufactured from POM and fitted with a 625ZZ ball bearing. Its outer running surface has a central section and bevelled edges designed to roll against a matching rail geometry.
The 24 mm outer diameter and nominal 5 mm axle size are commonly us..
1.25€
Ex Tax:1.03€
Out of Stock
Stock: Out of Stock
Model: GT2-POWGE-belt-6mm
POWGE 6 mm GT2 timing belt, made from nylon-covered neoprene and internally reinforced with fiberglass cords.
It is designed for synchronous transmissions and positioning systems in 3D printers, light-duty CNC machines, laser cutters and automation mechanisms using a 2 mm-pitch GT2 profile.
Fe..
1.99€
Ex Tax:1.64€
Out of Stock
Stock: Out of Stock
Model: POWGE-GT2-20T-10mm-di5
POWGE GT2 20-tooth idler pulley with an integrated bearing and side flanges. It is designed to guide or tension 10 mm GT2 belts when the toothed side of the belt runs against the pulley.
It is suitable for motion systems requiring a wider belt than the common 6 mm format, including certain CNC ma..
3.55€
Ex Tax:2.93€
Stock: In Stock
Model: POWGE-GT2-20T-6mm-di3
POWGE GT2 20-tooth idler pulley with an integrated bearing, intended for 6 mm belts and brackets using a nominal 3 mm axle or screw.
It is designed to guide or tension the toothed side of the belt in 3D printers, CNC machines and other GT2 mechanisms specifying a 20T idler with an M3 mounting.
..
3.55€
Ex Tax:2.93€