Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 70W
24 V, 70 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. This high-power variant is intended for systems that can both use and safely handle it: before replacing a 40 or 60 W heater, check the controller output, power supply, terminals, wiring, sensor, block and thermal configura..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: Resistencia 24V 80W
24 V, 80 W heater cartridge for hotend blocks with a cylindrical Ø6 mm bore. Its high power may shorten heat-up time and improve thermal recovery, but the hotend and entire electrical path must be verified as suitable before it can be used safely.
Technical specifications
..
3.50€
Ex Tax:2.89€
Out of Stock
Stock: Out of Stock
Model: IR-Module
The Mini IR module is a non-contact optical probe designed to measure the position of a 3D printer build surface. Its compact 24 × 18mm circuit board makes it suitable for toolheads with limited space, including custom Cartesian, CoreXY and delta machines.
This revision uses a differential optica..
20.99€
Ex Tax:17.35€
-14 %
Stock: In Stock
Model: 2510-12V
This 12 V 2510 brushless cooling fan provides efficient airflow in compact spaces. Measuring just 25 × 25 × 10 mm, it is ideal for cooling hotends, electronics, drivers, Raspberry Pi boards and other equipment where installation space is limited.
Features
Brushless DC cooling fan.
C..
3.00€ 2.59€
Ex Tax:2.14€
Out of Stock
Stock: Out of Stock
Model: Cable-3DTouch-2m
Two-metre cable for connecting a 3DTouch automatic bed-levelling sensor to a 3D printer controller board. It is useful for larger machines or for routing the probe wiring neatly through the toolhead, drag chain and frame to the electronics enclosure.
The sensor end has a white 5-position connecto..
3.15€
Ex Tax:2.60€
Stock: In Stock
Model: Termistor100K ohm NTC 3950-PT100-3mm-Dupont
100K NTC Beta 3950 hotend thermistor protected by a 3 mm cylindrical 304 stainless-steel capsule. The encapsulation provides a more robust installation than an exposed bead thermistor and fits heater blocks designed for sensors of this diameter.
Features
Type: 100K NTC Beta 3950 thermistor.
304..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: Termistor100K-PT100-3mm-XH
100K NTC Beta 3950 hotend thermistor with a 3 mm cylindrical 304 stainless-steel capsule, 1 metre cable and XH connector. Its encapsulated construction provides a robust fit in heater blocks designed for cylindrical temperature sensors.
Features
100K NTC Beta 3950 thermistor.
304 stainless-stee..
0.85€
Ex Tax:0.70€
Stock: In Stock
Model: 3010-12v-1m
3010 12V axial fan with a 1 metre power cable. Its nominal 30 × 30 × 10 mm dimensions make it suitable for hotends, small heatsinks, electronics and other mechanisms with limited space.
The long cable simplifies connection where the controller is located away from the cooling point and allows the..
2.99€
Ex Tax:2.47€
-11 %
Stock: In Stock
Model: 3Dtouch
The 3DTouch is an automatic bed leveling sensor for 3D printers. During the print preparation process, the probe detects the position of the print surface to help compensate for possible height differences between different points of the build plate.
This version features a non-metallic probe and..
13.99€ 12.45€
Ex Tax:10.29€
-47 %
Out of Stock
Stock: Out of Stock
Model: 4010-12v 1m
This 40 × 40 × 10 mm axial cooling fan operates at 12 V DC and features a 1 metre cable, making it ideal for installations where additional cable length is required between the fan and the controller or power source.
Features
40 × 40 × 10 mm axial cooling fan.
12 V DC operation.
..
4.25€ 2.25€
Ex Tax:1.86€
-47 %
Stock: In Stock
Model: 4010-24v 1m
4010 24V axial fan with a 1 metre power cable and a 2-pin XH2.54 connector. Its nominal 40 × 40 × 10 mm dimensions make it suitable for cooling hotends, heatsinks, electronics and small compartments.
The long cable simplifies installation in 3D printers and other machines where the controller boa..
4.25€ 2.25€
Ex Tax:1.86€
-69 %
Stock: In Stock
Model: 4020-24v
4020 24V axial fan with a PH connector and a 17 cm cable. Its nominal 40 × 40 × 20 mm dimensions provide a deeper housing than a 4010 fan, producing direct airflow for heatsinks, electronics and small compartments.
It is intended for applications where there is space for a 20 mm thick fan and con..
4.75€ 1.49€
Ex Tax:1.23€