Menu
Your Cart

Electronic

Stock: In Stock Model: Cable-12AWG-70cm-01
Red and black wires to power the RAMPS from the power supply.It is a tinned copper cable resistant to high temperatures. With silicone protection, it is very flexible.One of the ends is welded to facilitate the introduction of the cable into the RAMPS connector.Length: 70cmSection: 3.31mm²Diameter: ..
2.75€ Ex Tax:2.27€
Stock: In Stock Model: 16AWG-negro-1m
It is a tinned copper 16 AWG cable resistant to high temperatures. With silicone protection, it is very flexible.Length: 1mCable diameter: 1.53mmOuter diameter: 3mmColour: negro..
1.25€ Ex Tax:1.03€
Stock: In Stock Model: 16AWG-rojo-1m
It is a tinned copper 16 AWG cable resistant to high temperatures. With silicone protection, it is very flexible.Length: 1mCable diameter: 1.53mmOuter diameter: 3mmColour: red..
1.25€ Ex Tax:1.03€
Stock: In Stock Model: Cable-16AWG-50cm-01
Red and black wires for the heated bed. Red and black cables for the heated bed. One end of each cable has a connector crimped for the connection to the Ramps.This cable is used in our 3DSteel and P3Steel, it is also compatible with other 3D printer models of similar format.It is a tinned copper cab..
2.25€ Ex Tax:1.86€
Stock: In Stock Model: Spiral-1m
It is used to maintain the orderly wiring, avoid tangles and pulls1meter..
0.39€ Ex Tax:0.32€
Cable for LCD TFT - 50cm Cable for LCD TFT - 50cm
Out of Stock
Stock: Out of Stock Model: LCD-Cable-50cm
50cm LCD cable.Specs:Type: AWM 2651 10 PinsThreads: 28AWGVoltage: 300VLength: 50cm1 unit..
0.99€ Ex Tax:0.82€
Stock: In Stock Model: Terminal-4
It is commonly used to make connections to the power supply safely...
0.12€ Ex Tax:0.10€
Stock: In Stock Model: CB1-HEATsink
Disipador diseñado específicamente para BIGTREETECH CB1, ayudará a mantenerla refrigerada y funcionando sin problemas. Este disipador térmico asegura una óptima disipación de calor, evitando el sobrecalentamiento y posibles daños a tu impresora 3D.Fabricado con metal duradero, el disipador de calor ..
3.25€ Ex Tax:2.69€
Stock: In Stock Model: CNC-Shield-v3
Shield for Arduino UNO and other compatible boards, it is used to control CNC machines as plotters, laser engravers, milling machines, etc. 1 Piece with jumpers..
3.25€ Ex Tax:2.69€
CNC Shield Expansion Board for Arduino UNO V4 CNC Shield Expansion Board for Arduino UNO V4
Out of Stock
Stock: Out of Stock Model: CNC-Shield-V4
CNC shield V4 board for Nano board.It can be used as a controller expansion board for engraving machines and 3D printers.It has total 3 channel slots for A4988 stepper motor drivers (not included) to control three stepper motors. Each stepper motor channel only needs 2 IO ports, which means 6 IO por..
4.25€ Ex Tax:3.51€
DLC32 - 32bit board for laser engraving machine - ESP32, WIFI, GRBL DLC32 - 32bit board for laser engraving machine - ESP32, WIFI, GRBL
Out of Stock
Stock: Out of Stock Model: DLC32
Version: 2.1MKS DLC32 motherboard kit, is an offline engravinf master control kit developed for desktop engraving machines. The hardware is equipped with a 32-bit high-speed ESP32 module, integrated WIFI function, and directly drives a 3.5-inch touch colour screen; it can realize fast engraving and ..
19.99€ Ex Tax:16.52€
Stock: In Stock Model: DRV8825
The DRV8828 is a driver for stepper motors, with a resolution of 1/32 steps. Datasheet: https://www.pololu.com/product/2133 Heatsink included with thermal tape1 Piece ..
2.25€ Ex Tax:1.86€
Showing 61 to 72 of 190 (16 Pages)