The SKR mini E3 SKR mini E3 V2.0, evolution of the SKR mini E3 V1.2, is a board specially designed for the Ender3 3D printer, which can perfectly replace the original board.Features:Size: 100.75x70.25mmMicroprocessor: ARM Cortex-M3 STM32F103RCT6 chip with 32-bit CPU 72MHZInput voltage: 12/24VLogic v..
SKR MINI E3 V3.0 is a custom made motherboard specifically for Ender3 printers, a perfect replacement for original Ender 3 printer motherboards.Specifications:USB connection for computers has been changed from mini USB to micro USB (Baudrate 115200).Onboard silent drivers: TMC2209 UART mode.Protecte..
SKR Pico is a motherboard designed for the Voron 0.1 printer.Specs:Main control chip: Raspberry Pi RP2040 dual-core ARM processor. Optimized Heat Sink: better heat dissipation and good-looking.Chip Capacitor: Adopting MURATA capacitor. The fuse kit is consist of the holder and fuse. Easy to rem..
3D printer board compatible with 12 and 24v, uses the powerful ARM cortex-M3 CPU 32-bit processor, and is compatible with Marlin 2.0 onwards.The PRO version of the SKR series, is the most versatile and powerful of all, has multiple connections available, for 6 motors, wifi module, and so on. It is a..
The SKR V 1.4 plate is the successor to the popular SKR 1.3, it incorporates all the features of its previous model improving key points such asSupport for up to 4 fans (1 of them adjustable)Direct wifi compatibility.Closed-loop motor compatibility.Double connection for Z-axis motors.Support for RGB..
The 1.4 TURBO version is similar to 1.4, but with a 20% more powerful processor, 120 MHz instead of 100.The SKR V 1.4 plate is the successor to the popular SKR 1.3, it incorporates all the features of its previous model improving key points such asSupport for up to 4 fans (1 of them adjustable)Direc..
This filament sensor not only detects when the filament runs out, nut also it is able to detect a when the filament stops moving through a jam in the extruder.Works with Marlin 2+It is compatible with screens 2004, 12864, TFT24 (12864 mode), TFT35_V3.0 (12864 mode).1 unit..
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..
Version: 2.1TFT35 SPI, a medium size 3D printer screen.The TFT35 SPI display can work directly with Manta M4P/M5P/M8P + CB1 v2.2 without the need for additional modules.Due to the absence of an FPC IPS interface on the PI4B adapter, when using TFT 35 SPI with the PI4B + CB1 v2.2 adapter, it still re..
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..
Very versatile graphic display, as it can be connected in two ways at the same time:It can be connected as an external screen, using the pins TX and RX (black cable) so that you have the touch menu. This connection can be used to decrease the load on the processor.You can connect the two flat cables..