Stock: In Stock
Model: SKR-mini-E3-V3
The BIGTREETECH SKR Mini E3 V3.0 is a 32-bit controller board for desktop 3D-printer upgrades. It integrates five UART-configurable TMC2209 drivers, accepts 12 or 24 V DC input and brings together the usual motor, heater, fan, probe and display connections.
It is not a universal drop-in replacement..
39.90€
Ex Tax:32.98€
-10 %
Out of Stock
Stock: Out of Stock
Model: SKR-Pico
The BIGTREETECH SKR Pico is a compact 85 × 56 mm controller for Voron V0 printers and other projects requiring four independently controlled motors. It integrates an RP2040 microcontroller and four UART-controlled TMC2209 drivers and connects to a computer running Klipper over USB-C or a suitably co..
27.75€ 24.85€
Ex Tax:20.54€
Stock: In Stock
Model: SKR PRO V1.2
The BIGTREETECH SKR Pro V1.2 is a 32-bit controller board for custom 3D printers and electronics upgrades requiring six independent motor channels, replaceable drivers and a wide range of connections. It uses a 168 MHz STM32F407ZGT6 ARM Cortex-M4, operates from 12 or 24 V DC and supports STEP/DIR, U..
54.75€
Ex Tax:45.25€
Recommended
Stock: In Stock
Model: SKR 1.4
The BIGTREETECH SKR V1.4 is a 32-bit control board for 3D printers and DIY machines built around the NXP LPC1768 microcontroller. It combines five replaceable driver sockets, six motor connectors, bed, heater and fan outputs, a microSD reader and multiple expansion interfaces.
It is particularly ..
27.85€
Ex Tax:23.02€
Stock: In Stock
Model: SKR 1.4 TURBO
The BIGTREETECH SKR V1.4 Turbo is a 32-bit controller for 3D printers and DIY machines powered by an NXP LPC1769 microcontroller running at up to 120 MHz. It provides five replaceable driver sockets, six motor connectors and multiple interfaces for displays, sensors, probes and expansion modules.
..
46.50€
Ex Tax:38.43€
Stock: In Stock
Model: TFT24-V1.1
The BIGTREETECH TFT24 V1.1 combines two different ways of controlling a 3D printer in a compact 2.4-inch display: a standalone touchscreen interface communicating over a serial port and a 12864 LCD mode driven directly by the mainboard firmware. This dual interface lets you choose between fast graph..
30.99€
Ex Tax:25.61€
Stock: In Stock
Model: TFT35-SPI
The BIGTREETECH TFT35 SPI V2.1 is a 3.5-inch, 480 × 320 resistive touchscreen designed to display KlipperScreen from a compatible Linux host. It uses SPI for the image and I2C for touch input, making it particularly suitable for compact systems based on the BIGTREETECH CB1 V2.2 and Manta boards fitt..
20.99€
Ex Tax:17.35€
Stock: In Stock
Model: TFT35-V3.0
The BIGTREETECH TFT35 V3.0 combines two different ways of controlling a 3D printer in a 3.5-inch touchscreen: a standalone Touch Mode communicating over UART and a Marlin Mode that emulates a 12864 graphical LCD. When both interfaces are wired and configured, you can switch between the convenience o..
53.50€
Ex Tax:44.21€
Out of Stock
Stock: Out of Stock
Model: TFT43-V3.0
The BIGTREETECH TFT43 V3.0 combines a 4.3-inch touchscreen with graphical 12864 LCD emulation. Use the touch menu through a serial link to the mainboard, or use the printer firmware's own menu through the EXP connectors. It suits Marlin builds that need a larger display while retaining encoder-based..
73.99€
Ex Tax:61.15€
Stock: In Stock
Model: TMC2130-SPI
The BIGTREETECH TMC2130 V3.0 SPI is a two-phase bipolar stepper driver prepared for SPI communication. Motion uses STEP/DIR while firmware can set current and microsteps, select the chopper mode and read diagnostics.
This advanced version requires a socket or external wiring with the correct CS, SC..
7.99€
Ex Tax:6.60€
Stock: In Stock
Model: TMC2130-STEP/DIR
The BIGTREETECH TMC2130 V3.0 STEP/DIR is a bipolar stepper motor driver factory-configured for standalone operation. It receives STEP, DIR and ENABLE signals from the controller board, while motor current and microstep mode are set through the potentiometer and the socket's physical configuration.
..
7.99€
Ex Tax:6.60€
Stock: In Stock
Model: TMC2208-UART-Bigtreetech
The BIGTREETECH TMC2208 V3.0 UART is a StepStick driver for two-phase bipolar stepper motors, designed to substantially reduce motion noise in 3D printers, light CNC machines and automation projects. It combines STEP/DIR control with single-wire UART communication, allowing firmware configuration of..
4.25€
Ex Tax:3.51€