Stock: In Stock
Model: TMC2209-Bigtreetech
The BIGTREETECH TMC2209 V1.3 is a StepStick driver for two-phase bipolar stepper motors, designed for quiet motion, accurate control and advanced configuration in 3D printers, light CNC machines, robots and automation projects. It can operate through standard STEP/DIR signals or communicate over UAR..
4.75€
Ex Tax:3.93€
Stock: In Stock
Model: TMC2225-UART-Bigtreetech
BIGTREETECH TMC2225 V1.0 is a silent driver for two-phase bipolar stepper motors. It can operate through STEP/DIR signals or a single-wire UART connection. It includes StealthChop2 for quieter movement, SpreadCycle for more dynamic operation and MicroPlyer interpolation up to 256 microsteps.
Its ..
4.50€
Ex Tax:3.72€
Stock: In Stock
Model: TMC2226-Bigtreetech
The BIGTREETECH TMC2226 V1.0 is a StepStick driver for two-phase bipolar stepper motors, designed to combine quiet motion, accurate control and advanced configuration in 3D printers, light CNC machines, robots and automation projects. It can operate through standard STEP/DIR signals or communicate o..
4.99€
Ex Tax:4.12€
Stock: In Stock
Model: TMC2240-BTT
BIGTREETECH TMC2240 V1.0 is an intelligent two-phase stepper motor driver combining quiet motion, dynamic control, digitally adjustable current and advanced diagnostics. This version is supplied in its factory SPI configuration, allowing the firmware to configure and query the driver without physica..
8.92€
Ex Tax:7.37€
Stock: In Stock
Model: TMC5160Tpro-BTT
The BIGTREETECH TMC5160 Pro V1.1 is an SPI driver for two-phase bipolar stepper motors, designed for machines requiring more voltage and current headroom than common compact drivers can provide. It combines Trinamic TMC5160 control with an external-MOSF power stage while retaining features such as S..
22.45€
Ex Tax:18.55€
Only a few units in stock
-7 %
Stock: In Stock
Model: TMC5160Tplus-BTT
The BIGTREETECH TMC5160T Plus V1.0 is an external high-power driver for two-phase bipolar stepper motors. It combines a TMC5160-TA controller with eight external MOSFETs, a dedicated power terminal, heatsink enclosure and SPI connectivity, providing substantially more headroom than a conventional pl..
49.90€ 46.20€
Ex Tax:38.18€
Stock: In Stock
Model: U2C-BTT
The BIGTREETECH U2C V2.1 is a USB-to-CAN interface designed to connect a Linux computer —such as a Raspberry Pi— to the CAN boards in a 3D printer. It is particularly useful in Klipper installations with toolhead boards because it creates a dedicated SocketCAN interface without using the main contro..
14.95€
Ex Tax:12.36€
Stock: In Stock
Model: UPS-24V
The BIGTREETECH UPS 24V V1.0 is a power-loss detection and recovery module for 3D printers operating exclusively from 24V DC. When the main supply disappears, it signals the controller board and uses the energy stored in its supercapacitors to keep the electronics powered for a short time.
This r..
11.25€
Ex Tax:9.30€
Stock: In Stock
Model: Eco Turbo Fan Pipe
The BIQU Eco Turbo Fan Pipe is the flexible duct designed to carry air from the Eco Turbo Kit V1.0 to the part-cooling system installed on the toolhead. It allows the blower to remain off the carriage so that its weight does not move with the printer axes.
Its nominal 1.8 m length provides routin..
8.95€
Ex Tax:7.40€
Stock: In Stock
Model: Eco Turbo Kit
The BIQU Eco Turbo Kit V1.0 is a remote part-cooling system for 3D printers. It combines a Nidec brushless centrifugal blower with a BIGTREETECH controller board and transports air to the toolhead through a flexible hose.
Moving the blower away from the toolhead can reduce moving mass compared wi..
39.99€
Ex Tax:33.05€
Stock: In Stock
Model: H2 V2S
BIQU H2 V2S Dual-Gear Direct Extruder for 1.75 mm Filament
The BIQU H2 V2S is a compact direct extruder with integrated hotend for 1.75 mm filament. It combines dual drive gears, a 7:1 reduction and a bi-metal heatbreak in a toolhead designed to convert a compatible machine to direct extrusion wi..
76.45€
Ex Tax:63.18€
Stock: In Stock
Model: H2 V2X
BIQU H2 V2X 7:1 Direct Extruder for Voron StealthBurner and EVA 3
The BIQU H2 V2X is a lightweight, compact direct extruder designed for modular toolheads such as Voron StealthBurner and EVA 3. It combines the motor, 7:1 gearbox and dual drive gears in a 145 g machined aluminium body, reducing mo..
58.25€
Ex Tax:48.14€