Stock: In Stock
Model: Eddy Duo
BIGTREETECH Eddy Duo USB V1.0 is an eddy-current inductive probe designed to create fast, detailed bed meshes on 3D printers running Klipper. It measures the change in its coil's resonant frequency as it approaches a metal bed, allowing it to scan the surface without physical contact or necessarily ..
20.99€
Ex Tax:17.35€
Stock: In Stock
Model: HDMI5-BTT
BigTreeTech HDMI5 5-inch IPS Capacitive Touchscreen
The BigTreeTech HDMI5 is a 5-inch IPS capacitive touchscreen for displaying the interface of equipment with HDMI output. It can be used as a monitor with a Raspberry Pi, mini PC or other compatible computer, and is useful in 3D-printing projects w..
44.75€
Ex Tax:36.98€
Stock: In Stock
Model: HDMI7-BTT
BigTreeTech HDMI7 7-inch IPS Capacitive Touchscreen V1.2
The BigTreeTech HDMI7 is a 7-inch IPS capacitive touchscreen with HDMI input. It is designed to work as a monitor for a Raspberry Pi, mini PC or other compatible host, for example to display control interfaces in 3D-printing projects.
Featur..
58.34€
Ex Tax:48.21€
Stock: In Stock
Model: Hermit-crab-V2
The BIGTREETECH Hermit Crab V2.0 CAN is a manual quick-change platform designed to keep several toolheads prepared and swap them without dismantling every carriage component. It includes one electronic fixed plate and three removable tool plates for compatible hotends, extruders, probes or other too..
158.50€
Ex Tax:130.99€
Stock: In Stock
Model: IO2CAN
BIGTREETECH IO2CAN V1.0 is an SPI-to-CAN bus adapter for Klipper that plugs into a compatible 40-pin GPIO header. It adds an MCP2515-based CAN interface to a BIGTREETECH CB1, Raspberry Pi, or CM4 fitted to a suitable carrier board without occupying a USB port.
The board integrates the CAN control..
12.99€
Ex Tax:10.74€
Stock: In Stock
Model: K-Touch-BTT
The BIGTREETECH K-Touch V1.0.1 is a 5-inch wireless touchscreen for controlling 3D printers running Klipper and Moonraker over the local network. It displays temperatures and status, moves axes, extrudes filament, starts files, provides common calibration tools and stores up to 50 printers for quick..
68.50€
Ex Tax:56.61€
Stock: In Stock
Model: KrakenV1.1
The BIGTREETECH Kraken V1.1 is a 32-bit control board for large 3D printers and projects with many motors. It combines an STM32H723 with eight SPI-controlled TMC2160 drivers, providing a compact electronics platform without eight separate plug-in driver modules.
Its defining feature is the 24 to ..
136.99€
Ex Tax:113.21€
-20 %
Out of Stock
Stock: Out of Stock
Model: Manta-4MP
The BIGTREETECH Manta M4P combines a printer controller and a CM4-form-factor computer-module socket on one board. Its four X, Y, Z and E0 driver sockets make it a compact choice for single-extruder machines, Klipper projects and upgrades where fewer connections between host computer and motion elec..
69.99€ 55.99€
Ex Tax:46.27€
Only a few units in stock
-22 %
Stock: In Stock
Model: Manta-8MP
The BIGTREETECH Manta M8P V1.1 is a 32-bit controller for advanced 3D printers, CoreXY machines and projects requiring several independent motors. It combines a 64 MHz STM32G0B1VET6 Cortex-M0+, eight replaceable driver sockets and a BTB connector for mounting a compatible Linux module directly on th..
89.99€ 69.99€
Ex Tax:57.84€
Stock: In Stock
Model: Manta-8MP-V2
The BIGTREETECH Manta M8P V2.0 is a 32-bit controller for advanced 3D printers, CoreXY machines and projects requiring several independent motors. It combines a 550 MHz STM32H723ZET6 Cortex-M7, eight replaceable driver sockets and a BTB connector that accepts a compatible Linux module to run Klipper..
75.99€
Ex Tax:62.80€
Stock: In Stock
Model: MAX31865-V2
BigTreeTech MAX31865 V2.0 module for connecting PT100 and PT1000 RTD temperature sensors through SPI. It uses the physical format of a plug-in stepper motor driver and provides DIP switches for selecting the sensor type and number of wires.
Features
MAX31865 RTD-to-digital converter.
Compatible..
10.90€
Ex Tax:9.01€
Stock: In Stock
Model: BTT Micro Probe
The BIGTREETECH MicroProbe V2.0 is a compact, lightweight contact probe designed to measure a 3D printer build surface. Its deployable metal pin physically touches the bed, allowing it to work with glass, PEI, steel, aluminium and other stable surfaces without depending on magnetic or optical proper..
22.50€
Ex Tax:18.60€