M6 Sliding T-Slot Nut for European 30-Series Profile, 8 mm Slot

Description

Nickel-plated carbon-steel M6 sliding nut for HTA3D European 30-series profiles. It is intended for brackets, plates and structural joints using M6 fasteners.

It is inserted through an open end of the profile and can be moved along the slot before final tightening.

Key features

• Family: European 30-series profile.
• Nominal slot: 8 mm.
• Thread: M6.
• Material: nickel-plated carbon steel.
• Nominal body: 16 × 16 mm.
• Overall height: 6 mm.
• Central recess: 8 mm.
• Upper step: 2 mm.
• Approximate weight: 7.3 g.

Compatibility

Directly compatible with our 3030 and 3060 profiles and HTA3D 30-series accessories designed for M6 fasteners.

Joint strength also depends on the screw, bracket or plate, number of mounting points and load distribution.

Installation

• Insert the nut through an open end before closing the structure.
• Slide it to the mounting point.
• Use an M6 screw of suitable length.
• Ensure sufficient thread engagement and prevent the screw from bottoming out against the profile.
• Square the assembly and tighten the fasteners progressively.

Other available threads

Also available with M3, M4 and M5 threads.

Package contents

• 1 × M6 sliding nut for 30-series profile.